Fuel Pumps

[Dynomite]

Originally Posted by cadillac531

OK. So I ordered 2 of the P240KC pumps from Rock Auto and installed them yesterday. The fuel pressure has definitely been restored. I have now 50psi from both pumps. It definitely restored power.

I obviously haven't put a lot of miles on these pumps yet, but so far I would recommend these pumps for anyone looking for replacements. Plus they were only 22.00/ea. Seemed worth it to try them. They are just as quiet as the stock ones too.

There were no visual issues upon inspection of the pumps. They sit in fuel all the time and had little use. They were bound to go out sooner or later.

Originally Posted by scottfab

I put in two from Rockauto last year and have been very happy with them. Rockauto part # for ZR-1 is #P240KC. (Performance Electric)
The kit comes with a strainer and various parts. I did not have to use
the pigtail adapter. They plugged right in.
Cost was $23 ea plus shipping. (I'd replace both while in there)

Originally Posted by Roadster

Pumps came in on Thursday.....they have this rubber type cover on the pumps, I imagine this is the norm. Are these covers for shipment purposes and need to be removed prior to installation?
On the shelf they go......

Originally Posted by cadillac531

Since there are so many different applications for these pumps, some may require that rubber insulator. In order to utilize them in the existing fuel pump assembly, they must be removed.

Great Information.......keep us informed if there are any issues