Suspension Settings - ZR-1 Net Registry Forums

Harvie · 09-10-2014

There have been a zillion attemps over the years to try and do it, you pay the money and the vendors go away. Only one has ever proven to work with the top on or off....weld a roll bar in once and the fix is done forever..

It does not cost that much to do it once and do it right.

I did it in 94-95 and it cost me about $50 for the welding materials (I tigged it in) prebent 2" steel tube, fiberglass mat., resin, harder & 6 pac for the painter to touch up under the rug in rear compartment when I finished.

In addition I use it for my shoulder harness anchor and to hold the fire extinguisher.

09-10-2014	#12
Harvie Join Date: Aug 2014 Location: In my house Posts: 103	Re: Suspension Settings There have been a zillion attemps over the years to try and do it, you pay the money and the vendors go away. Only one has ever proven to work with the top on or off....weld a roll bar in once and the fix is done forever.. It does not cost that much to do it once and do it right. I did it in 94-95 and it cost me about $50 for the welding materials (I tigged it in) prebent 2" steel tube, fiberglass mat., resin, harder & 6 pac for the painter to touch up under the rug in rear compartment when I finished. In addition I use it for my shoulder harness anchor and to hold the fire extinguisher. __________________ Charter Member (since the 91) of the 1ST ZR1 Registry 1st vet $157.59. mo for 3 years new 2nd new 1 check & STILL eating funds years later [-X show poodles & trailer queens :-({\|= Fast and fun not pretty in pink. Last edited by Harvie; 09-10-2014 at 08:08 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode