Plenum Reinstall - ZR-1 Net Registry Forums

randy ransome · 01-13-2014

First off let me say there's no way I would have attempted this without the help from everyone on this forum. I read up on the R&R of the plenum.
There were so many helpful articles and pictures that I had to give it a try myself. Usually I have someone work on my stuff but I figure if I've got a ZR-1 it's a right of passage to do this.

I sanded and repolished the intake, fixed vacuum leak, removed TB coolant, and installed new injectors. Took my time, something I'm not known for, and went out yesterday and in about three hours had it running. So far so good, it's idling at about 900 rpm.

Thanks again to everyone who contributes on this forum.

01-13-2014	#1
randy ransome Join Date: Mar 2006 Location: Olive Branch,MS Posts: 291	Plenum Reinstall First off let me say there's no way I would have attempted this without the help from everyone on this forum. I read up on the R&R of the plenum. There were so many helpful articles and pictures that I had to give it a try myself. Usually I have someone work on my stuff but I figure if I've got a ZR-1 it's a right of passage to do this. I sanded and repolished the intake, fixed vacuum leak, removed TB coolant, and installed new injectors. Took my time, something I'm not known for, and went out yesterday and in about three hours had it running. So far so good, it's idling at about 900 rpm. Thanks again to everyone who contributes on this forum. Last edited by randy ransome; 01-14-2014 at 01:25 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode