where do i buy the best front aor dam

[Schrade]

Originally Posted by secondchance

I have been running M1 Prowler - a one piece polyurethane spoiler.M1 is quite thicker then OEM piece. I drilled a hole on the lower lip at the pointed end and bolted a 8 mm (I think...) hex so that when I hit the pavement going over driveway/road bolt head would hit the pavement. This averts about 70% of the lip taking the damage. Apart from some scraping which I sand and paint (satin black bumper paint) once or twice a year, this piece can take hits without falling apart.
Check Corvette Central.

Satin Black is what I used on mine too - although it's budget paint Acrylic Latex, durable 'til you scrape it again - water cleanup, and you know you'll have to do it more than once. Spots well, and easy to 'fade' spotting into previous coat, even if you have to put some 800 grit to the dam beforehand...