![]() |
#1 |
![]() Join Date: Oct 2013
Location: Colorado Springs, CO
Posts: 160
|
![]()
What brand/part number are you guys having good results with for an oil pressure sensor?
I replaced mine with a Duralast and it seems to run about 20 psi higher than the original.....so when cold it almost pegs the gauge and when warm, it shows nearly at the top of the gauge at cruising rpm. Idle when warm shows about 2/3 up the gauge and the old sender showed 1/3. Basically, everything shows about 1/3 of the gauge higher than it was before. The original read ok, but started fluctuating about 10-15 psi at idle when warm and I found some oil leaking into the electrical connector portion. Thanks Chris |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|