C-beam plate - ZR-1 Net Registry Forums

cward · 05-06-2005

Hi Ron,

I think that I have the first C-beam plate that Bill made. He sent it to me to test on #364. It is not as smooth as the later versions but worked better than expected. I would suggest that any Z owner get one. It really helped expedite the removal and installation of trans, engine and clutch. Since that was done fairly often in my car, it was a great addition to the car. It also helped in the performance of the car. Made the trans stay in one place and stiffened up the whole drive train. He asked me to test the plate as he figured that I would give it a test in nearly all types of applications of racing and street driving. I was putting nearly 20K miles a year on my Z at that time and racing in all types of venues. It never failed and worked just as it should.

Curtis

PS: I kept the plate off #364 and will install it on my next Z.

05-06-2005	#11
cward Join Date: Dec 2004 Location: Luling, TX Posts: 97	Hi Ron, I think that I have the first C-beam plate that Bill made. He sent it to me to test on #364. It is not as smooth as the later versions but worked better than expected. I would suggest that any Z owner get one. It really helped expedite the removal and installation of trans, engine and clutch. Since that was done fairly often in my car, it was a great addition to the car. It also helped in the performance of the car. Made the trans stay in one place and stiffened up the whole drive train. He asked me to test the plate as he figured that I would give it a test in nearly all types of applications of racing and street driving. I was putting nearly 20K miles a year on my Z at that time and racing in all types of venues. It never failed and worked just as it should. Curtis PS: I kept the plate off #364 and will install it on my next Z. __________________ Curtis Ward 91 ZR-1 #364 RIP

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode