1992 ABS diagnosis with Tech1A - ZR-1 Net Registry Forums

Tripper_1966 · 08-26-2013

This is all new to me...

have a Tech1A with mass storage card 3000003.
I can read engine codes no problem.

Supposedly from where I purchased the tester, it is supposed to be capable of reading also codes for ABS and the selectable ride control.
I select Chassis but then get on the Tech1A display no ABS controller found.

The unit I have has the 14/26 PIN DLC cable (part # 02001637) connected to the Tech1A and opposite end of cable is attached to the GM 12/14 PIN DLC adapter (part # 02001384) that connects to the plug under the dash.

Am I missing a part on the cable in order to read from the ABS ?

Thanks

Paul

08-26-2013	#1
Tripper_1966 Join Date: Apr 2013 Location: Barrie, Ontario Posts: 20	1992 ABS diagnosis with Tech1A This is all new to me... have a Tech1A with mass storage card 3000003. I can read engine codes no problem. Supposedly from where I purchased the tester, it is supposed to be capable of reading also codes for ABS and the selectable ride control. I select Chassis but then get on the Tech1A display no ABS controller found. The unit I have has the 14/26 PIN DLC cable (part # 02001637) connected to the Tech1A and opposite end of cable is attached to the GM 12/14 PIN DLC adapter (part # 02001384) that connects to the plug under the dash. Am I missing a part on the cable in order to read from the ABS ? Thanks Paul __________________ [B]1992 ZR1, #454[/B] [I]Stock and mint with 6600 miles[/I]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode