ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Off Topic > OFF TOPIC

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-15-2012   #1
rhipsher
 
rhipsher's Avatar
 
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
Default Revolutionary tool.

This is one of those new reamers that goes around corners.



Everybody makes mistakes. But I figured I show some of them. These are called DR inserted drills. When the cutting edge wears out you just unscrew the carbide inserts and rotate them around to another corner and your ready to go. They also are high pressure coolant fed holes that go all the way down to the tip. Not only does it keep the cutting edge cool deep in the hole but also blasts the chips out. The one on the right is 1 5/8 dia and is $1,000 just for the drill body. And this is why CNC machines are equipped with a single block function which only makes one move at a time. And a rapid feed over ride so the spindle won't head toward the part at 1,100 inches per minute. Once the program is proven on the first part then you can turn everything up to 100% and let her rip.
rhipsher is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020