Marc Haibeck under plenum dvd...

[Paul Workman]

Originally Posted by John Boothby

Disconnect all the outer hose and electrical connections. This includes the throttle cables (this takes some patience) and intake duct, pvc lines out of the sides, MAP sensor hose, IAP connector, etc . These are all visible.

Very good overview of the whole procedure.

Thought I would share a little trick I found helps with the throttle (and a 90s cruise control cable).

Once I get the cover off the TB cables, I rotate the "half moon" cable spools on the TB to WOT and wedge a small screwdriver handle under them. You'll see what/where I mean, next time you're "in there". I would think a piece of a 3/4" wooden doll would work too. Sure makes that little process a LOT easier - not having to fight the spring tension while trying to faniggle the cables out of their sockets.

P.