Remove Hose: Thermostat Housing to Radiator - ZR-1 Net Registry Forums

tf95ZR1 · 03-12-2012

I'm switching out my radiator and today joined the busted up knuckles club.
I have everything removed from the radiator but the hose from the thermostat housing to radiator tank.
I have moved the hose clamps and used a screw driver to break the seal of the hoses to their respective nipples.
(Calm down). I can lift the radiator out of the bottom support and rotate it slightly, but I can't get it off the hose.
I ran out of time to finish the job tonight. I don't want to have to take the housing off or apart and DEFINITELY don't want to break it.
Recommendations? Just keep at it and it will give up the ghost? Experiences? TIA

03-12-2012	#1
tf95ZR1 Join Date: Aug 2005 Location: Northridge, CA Posts: 1,461	Remove Hose: Thermostat Housing to Radiator I'm switching out my radiator and today joined the busted up knuckles club. I have everything removed from the radiator but the hose from the thermostat housing to radiator tank. I have moved the hose clamps and used a screw driver to break the seal of the hoses to their respective nipples. (Calm down). I can lift the radiator out of the bottom support and rotate it slightly, but I can't get it off the hose. I ran out of time to finish the job tonight. I don't want to have to take the housing off or apart and DEFINITELY don't want to break it. Recommendations? Just keep at it and it will give up the ghost? Experiences? TIA Last edited by tf95ZR1; 03-12-2012 at 02:56 AM. Reason: Wanted 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode