Finally passed Ca smog,what a pain in the @$$! - ZR-1 Net Registry Forums

Z51JEFF · 01-04-2012

Well,got the thing smogged.Had to take the car to a State smog referee to get it done.The car had a max Nox level at 15 MPH of 250,25 MPH of 340 opposed to 500 and 702 the first time I failed.What was different this time was I removed the Haibeck chip and replaced with stock,removed open air cleaner lid and replaced with stock,replaced both 02 sensors with new.The one thing I forgot when I failed was the air cleaner coupling clamp was loose.Would this loose clamp sucking air from the coupling cause any problems?I know that sounds minor but when there isnt anything that makes sense on the failed test Im looking for anything I can find.Thanks for all the info in previous post,Jeff.

01-04-2012	#1
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	Finally passed Ca smog,what a pain in the @$$! Well,got the thing smogged.Had to take the car to a State smog referee to get it done.The car had a max Nox level at 15 MPH of 250,25 MPH of 340 opposed to 500 and 702 the first time I failed.What was different this time was I removed the Haibeck chip and replaced with stock,removed open air cleaner lid and replaced with stock,replaced both 02 sensors with new.The one thing I forgot when I failed was the air cleaner coupling clamp was loose.Would this loose clamp sucking air from the coupling cause any problems?I know that sounds minor but when there isnt anything that makes sense on the failed test Im looking for anything I can find.Thanks for all the info in previous post,Jeff.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode