Throttle Body Corrosion Repaint

[Socalerv]

Has anyone had success repairing and repainting the corrosion found on the throttle body adjacent to the plate?

Here is my thought going forward.

• Remove plate ( any tricks as they should be corroded)
• Tape off affected are for sanding and overspray
• Sand affected area of corrosion and clean
• Fill in recessed area with paint glaze
• Sand smooth, clean, clean
• Paint with Lingenfelter LT5 paint (rattle can)
• Repalce plate with new from ZR1 member and new gasket from Jerry's.

Probably need new bolts, where can I get them?