My Saturday Projects - ZR-1 Net Registry Forums

XfireZ51 · 10-04-2011

With fall and winter approaching, time to get some projects completed before putting ZR away before the snow flies. So here's what I did:

1. Oil and filter change
2. Installed my ZT-2 Wideband O2
3. Replaced shift tunnel rubber gasket. Old one was ripped and heat came
up from exhaust.
4. Removed oil pan stud to seal oil leak. I used Black RTV on the stud and
then used a Doty washer to provide an additional seal. So far the stud
is oil free. No more oil leaks. If this doesn't work, it'll be time to replace
pan gasket next year.
5. Made appt for tuning for WOT on 10.14 at Speed Inc dyno.

10-04-2011	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	My Saturday Projects With fall and winter approaching, time to get some projects completed before putting ZR away before the snow flies. So here's what I did: 1. Oil and filter change 2. Installed my ZT-2 Wideband O2 3. Replaced shift tunnel rubber gasket. Old one was ripped and heat came up from exhaust. 4. Removed oil pan stud to seal oil leak. I used Black RTV on the stud and then used a Doty washer to provide an additional seal. So far the stud is oil free. No more oil leaks. If this doesn't work, it'll be time to replace pan gasket next year. 5. Made appt for tuning for WOT on 10.14 at Speed Inc dyno.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode