Ses light Heibeck Chip and Secondaries Question

[XfireZ51]

Originally Posted by ugo85r

so i have a bad one information which block the passage in full power ?
if i understand with this chip the car is in full power all the time ? even if one of parameter too have the full power is bad ?

ugo,

With the secondary delete option as Marc does it, you are always on full power. No other option. The parameters that would disable FULL POWER on a stock motor should be eliminated ie Not enough vacuum etc. In fact Marc programs it so that you would not get a code for insufficient vacuum. If you have a bad injector or insufficient fuel, you'll get a lean code 61. In that instance, sometimes the SES light will flicker and not be a "hard code". No matter you don't want to run the car very long.
As an FYI, I originally removed throttle plates and tie-wrapped the secondaries open. I also installed a "dummy plug" on the secondary MAP sensor. ECM was happy.