Brake Puzzler - ZR-1 Net Registry Forums

jcruz · 09-05-2011

I just got done swapping out the front brake pads on my 92 and I've run into a situation I never encountered before:

Every time, after bleeding the RR and the LR, the pedal would be nice and stiff. Then, I'd jump over to the RF and the pedal would go soft again. WTH? Obviously, some air is getting back into the lines. Could it possibly be the bleeder screw needs to be replaced? Any other ideas?

Thanks,

John

09-05-2011	#1
jcruz Join Date: Mar 2010 Location: Fort Myers, FL Posts: 343	Brake Puzzler I just got done swapping out the front brake pads on my 92 and I've run into a situation I never encountered before: Every time, after bleeding the RR and the LR, the pedal would be nice and stiff. Then, I'd jump over to the RF and the pedal would go soft again. WTH? Obviously, some air is getting back into the lines. Could it possibly be the bleeder screw needs to be replaced? Any other ideas? Thanks, John __________________ 1992 #043, Aqua/Gray 40k miles

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode