A question about oil pan bolts. - ZR-1 Net Registry Forums

Z51JEFF · 08-07-2011

I noticed my fisrt oil spot on the garage floor and took a look at the oil pan,you can almost see it through all the oil caked on the sides.

.So my question is can I just torque down the bolts or is the gasket shot once oil has seeped past the seal.I know what Ill be doing next weekend,better stock up on alot of rags and degreaser.I think Ill try an orange based degreaser if I can find one.

08-07-2011	#1
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	A question about oil pan bolts. I noticed my fisrt oil spot on the garage floor and took a look at the oil pan,you can almost see it through all the oil caked on the sides..So my question is can I just torque down the bolts or is the gasket shot once oil has seeped past the seal.I know what Ill be doing next weekend,better stock up on alot of rags and degreaser.I think Ill try an orange based degreaser if I can find one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode