Question about timing chain guide bolt - ZR-1 Net Registry Forums

bdw18_123 · 03-28-2011

Ok, I'm in the process of re-assembling my LT5 and I need some help. I'm working on getting all the timing chain guides, gears, chains, etc in. I've found all the correct bolts for the chain guides except for one.

Jerry's bolt info pdf doesn't list that one bolt and I can't seem to find any info about it anywhere. Jerry's pdf lists the 4 chain guide pivot bolts (the ones that go into the block) and the 1 short 20mm bolt that holds the passenger side fixed chain guide to the passenger head. It doesn't list the other bolt (I think there is supposed to be a bushing too) that holds the top of the long, straight chain guide to the driver's head.

See the picture below (using your pic, Lee

), the red arrow is pointing to where the bolt & bushing that I'm talking about goes.

Can someone here post a picture of that bolt and the bushing and also measure the bolt (thickness & length from bottom of bolt head in millimeters) so I have something to go by to find mine?

03-28-2011	#1
bdw18_123 Join Date: Apr 2009 Location: Prather, CA Posts: 808	Question about timing chain guide bolt Ok, I'm in the process of re-assembling my LT5 and I need some help. I'm working on getting all the timing chain guides, gears, chains, etc in. I've found all the correct bolts for the chain guides except for one. Jerry's bolt info pdf doesn't list that one bolt and I can't seem to find any info about it anywhere. Jerry's pdf lists the 4 chain guide pivot bolts (the ones that go into the block) and the 1 short 20mm bolt that holds the passenger side fixed chain guide to the passenger head. It doesn't list the other bolt (I think there is supposed to be a bushing too) that holds the top of the long, straight chain guide to the driver's head. See the picture below (using your pic, Lee ), the red arrow is pointing to where the bolt & bushing that I'm talking about goes. Can someone here post a picture of that bolt and the bushing and also measure the bolt (thickness & length from bottom of bolt head in millimeters) so I have something to go by to find mine? __________________ [IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode