1991 slave cylinder large vs. small bore - ZR-1 Net Registry Forums

mike100 · 03-13-2011

my original slave was weeping a little and ran the res dry. It still doesn't work as well as it should even after a bleed.

I bought a new one locally, but it is the larger 1-1/8" bore size and mine is the smaller one. I heard that there were two sizes on the 91's and that the later cars with ZF6's all use the larger one.

Can I use this with the orig master hydraulic?

03-13-2011	#1
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,802	1991 slave cylinder large vs. small bore my original slave was weeping a little and ran the res dry. It still doesn't work as well as it should even after a bleed. I bought a new one locally, but it is the larger 1-1/8" bore size and mine is the smaller one. I heard that there were two sizes on the 91's and that the later cars with ZF6's all use the larger one. Can I use this with the orig master hydraulic?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode