Saturday 2/12 Gathering...expert help needed>>>

[ZR1Vette]

Well, my project came together sooner than expected in that parts came back early so my last moment asking if anyone in WAZOO has couple hours on Saturday to help install beam plates and a new exhaust.

All prep work is done... removal of OEM exhaust and a bit of house keeping on the bottom side>>



All tools and material (anti seize/exhaust pipe sealer etc) in hand and the Corsa exhaust has been completed:

Media blasted and ceramic/baked on coating in satin black (yes I debated about changing out the OEM exhaust, but changing from polish cans/tips to black was one hurdle cleared and besides I have the OEM exhaust nicely stored for future use). And once OEM exhaust is removed (and I know I am preachin to the choir) boy you can see how restrictive that exhaust is)



Polished up the Corsa pipes a bit>>>


I really appreciate that the resonator is a straight thru no reductions in pipe size and that the H cross over is full sized (many reduce the hole diameter regardless of the H pipe size>>



I am sure the exhaust install is straight forward...it is the beam plate install that is where I am looking at experienced hands.

If folks can not make it due to late notice most understandable and I can look to early March.

Thanks all