ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-22-2011   #1
HIZNHRZ
 
Join Date: Apr 2004
Location: Germantown, MD
Posts: 738
Default MD Emissions Testing

In 2008, just after getting the Haibeck 500Hp top end package I had to get the car emissions tested. I was lucky in that they elected to do the tail pipe test rather than the rolling dyno test. The results were:

FY 2008 Hydrocarbons (HC) Carbon Monoxide (CO)
- MD State Standard:......... 220 PPM..............1.20 PCT
- Inspection Reading:..........121 PPM................00 PCT

In 2008 in that they looked under the car (with mirrors), checked the gas tank inlet size, and looked under the hood. This year I drove in, they hooked the car up, checked the tank inlet size, and in a few minutes I drove out. With 6K more miles on the odometer the results were:

FY 2010 Hydrocarbons (HC) Carbon Monoxide (CO)
- MD State Standard:......... 200 PPM..............1.00 PCT
- Inspection Reading:.......... 57 PPM.................00 PCT

It appears a vehicle 20 years and older can be registered as Historic in Maryland which also means they are exempt from emissions testing. My build date was 10-1990 so it looks like if I go ahead and register as Historic, this could be the last emissions test for my Z.
HIZNHRZ is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020