01-21-2011 | #1 |
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
learned something very intersting about cars with ASR
was at bill bs getting a new slave installed as well as some other stuff , when i learned that everytime you take off your throttle cable ie plenum pulls etc you MUST re adjust your throttle via adjusting the throttle at the asr. i found this out through greg who helps bill from time to time . we hooked up the scanner and found that for the last year(last time i pulled the plenum) my car has only had 85% throttle when wide open. i thought no biggie wont make much difference , but after greg adjusted and got back home and hooked up the g tech and did some runs on my back road testing ground it does make a big difference.. the car ran 3 tenths faster and 2.1 mph faster than it ever has on my backroad testing ground . i could never figure out why she seemed to labor at the strip above 6500 rpms . she now pulls strong all the way to 7100. so if you have a 92 or later ck out your wide open throttle % you just might find some free hp . the adjustment proceedure is in the fsm.
|
Thread Tools | |
Display Modes | |
|
|