|
05-17-2010
|
#1 |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Door lock and security alarm
When I had the car painted recently, I had the shop switch door lock cylinder betrween the driver side and passenger side since I had been using only the driver side to unlock. I stopped using PKE fob because I hate bulging pocket.
Since the switch, when I unlock the door it triggers the alarm. I have to insert the key, turn counter clock wise (turns off the alarm) and then turn the key clock wise and re-unlock. I use the power lock button to arm and lock doors. I pulled the door panel yesterday to figure out what is going on but can't. Has anyone had a similar situation? Bad switch connected to the door lock cylinder? I could not find an appropriate section in the factory manual. Any help would be appreciated. |
|
|
|
05-17-2010
|
#2 | |
|
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: Door lock and security alarm
I had that happen to me once on another car, and it turned out that the wire connections on the lock themselves were not properly attached (loose connection)
Quote:
|
|
|
|
|
|
05-17-2010
|
#3 |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Door lock and security alarm
Hmmm...
Sounds like a pain in the a$$ work - tiny space, no room to stick my hand in, etc...  Any tips? Do I need to pull the lock cylinder and disassemble? I saw a sort of white plastic thing on the cylinder w/ 2 wires coming out of it. I presume this is what you are talking about? Last edited by secondchance; 05-17-2010 at 01:31 PM. |
|
|
|
|
05-17-2010
|
#4 | |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Door lock and security alarm
Quote:
I have the same problem on my 1994 ZR-1. The alarm sounds if I open the door with the key from the drivers side, but not from the passenger side. I plan to look at the door lock switch. Come on up and we can do two at once troubleshooting. Jim
__________________
If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member |
|
|
|
|
|
05-17-2010
|
#5 | |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Door lock and security alarm
Quote:
I need to change out sway bar bushings. I was at Advanced Auto Parts and they loan out the tool I need for this job. Do you have any suspension work pending? I take it you are back from BG? |
|
|
|
|
|
05-19-2010
|
#6 |
 
Join Date: Aug 2005
Location: Pa
Posts: 114
|
Re: Door lock and security alarm
A trick is to drop the door latch to get to the door lock switch.
I will have to make one of your events. |
|
|
|
|
05-20-2010
|
#7 | |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Door lock and security alarm
Quote:
|
|
|
|
|
|
05-20-2010
|
#8 | |
|
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Door lock and security alarm
Quote:
We will give you a nice WAZOO Greeting.  Jim |
|
|
|
|
|
05-20-2010
|
#9 | |
|
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Door lock and security alarm
Quote:
|
|
|
|
|
|
05-20-2010
|
#10 | |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Door lock and security alarm
Quote:
Sorry, Jim. Following week? |
|
|
|
|
 |
|
|
Linear Mode
