WTB: Pair of ZR-1 ported heads complete - ZR-1 Net Registry Forums

Sgreg · 02-26-2010

Anyone got a set on the shelf that needs to go. PM me please.

carter200 · 02-26-2010

There were some on ebay. Don't know anything about them......

limey · 02-26-2010

I have a set, but only for a heavy modded motor. Have big valves as well. Zero miles since overhauled, massive porting work done and taken off of a 415 motor.

These any good?

XfireZ51 · 02-26-2010

What does complete mean?

Sgreg · 02-26-2010

Quote:

Originally Posted by carter200

There were some on ebay. Don't know anything about them......

Just couldn't get much info. about the ones on the Bay. I was afraid to bid but the price was right.

Sgreg · 02-26-2010

Quote:

Originally Posted by XfireZ51

What does complete mean?

Valves, springs, keepers etc.

Sgreg · 02-26-2010

Quote:

Originally Posted by limey

I have a set, but only for a heavy modded motor. Have big valves as well. Zero miles since overhauled, massive porting work done and taken off of a 415 motor.

These any good?

Might be too much for my car. Stock cubes with PP to plenum and inj. housings, headers and tune..Plenum is 36mm. Wouldn't even match up and big valves are not needed.

A26B · 02-26-2010

I probably have a set of stock heads that will fit your needs, after I take them to Greg VanDeventer for the port work. I visit with Greg & he lives nearby. If we do that, I would suggest you send him your injector housings to insure port match. I can do the eBay price of $1500 for the set, complete with valves, springs & retainers, PLUS whatever Greg charges for his port work. Would you want the secondaries in or out?

Sgreg · 02-27-2010

Quote:

Originally Posted by A26B

I probably have a set of stock heads that will fit your needs, after I take them to Greg VanDeventer for the port work. I visit with Greg & he lives nearby. If we do that, I would suggest you send him your injector housings to insure port match. I can do the eBay price of $1500 for the set, complete with valves, springs & retainers. Would you want the secondaries in or out?

Jerry, I would want the secondaries in. Corey did my plenum and inj. housings at 36 which is a good match for my stock cube LT-5. That is a very fair price; let me get back with you tomorrow. I am looking at one other situation before I make my final decision.

A26B · 02-27-2010

After reading my post, I need to clarify, $1500 is for the stock heads. Whatever Greg charges to do the head port work would be additional.

02-26-2010	#1
Sgreg Join Date: Aug 2006 Location: Texas Posts: 518	WTB: Pair of ZR-1 ported heads complete Anyone got a set on the shelf that needs to go. PM me please. __________________ 1991 ZR-1, Black, Black, # 541

02-26-2010	#2
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: WTB: Pair of ZR-1 ported heads complete There were some on ebay. Don't know anything about them...... __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155

02-26-2010	#3
limey Join Date: Oct 2008 Location: tampa Posts: 538	Re: WTB: Pair of ZR-1 ported heads complete I have a set, but only for a heavy modded motor. Have big valves as well. Zero miles since overhauled, massive porting work done and taken off of a 415 motor. These any good?

02-26-2010	#4
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: WTB: Pair of ZR-1 ported heads complete What does complete mean?

02-26-2010	#8
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: WTB: Pair of ZR-1 ported heads complete I probably have a set of stock heads that will fit your needs, after I take them to Greg VanDeventer for the port work. I visit with Greg & he lives nearby. If we do that, I would suggest you send him your injector housings to insure port match. I can do the eBay price of $1500 for the set, complete with valves, springs & retainers, PLUS whatever Greg charges for his port work. Would you want the secondaries in or out? __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 02-27-2010 at 12:27 AM.*

02-27-2010	#10
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: WTB: Pair of ZR-1 ported heads complete After reading my post, I need to clarify, $1500 is for the stock heads. Whatever Greg charges to do the head port work would be additional. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.