|
|
Thread Tools | Display Modes |
01-03-2010 | #31 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
personally i think that either 392 or 410 gears makes the car easier to drive in stop and go traffic.less shifting and i can go as low as 22 miles an hr in 4th gear. fuel milage on the freeway doesnt seem to go down at all. at least on my cars
|
01-03-2010 | #32 | |
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Quote:
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
01-03-2010 | #33 |
Guest
Posts: n/a
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Ryan and Brad,
Thanks for sharing your experience and confirming what I am looking forward to with the gear change...........I can't wait |
01-03-2010 | #34 |
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,798
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
With the 4.10s does the pinion have one less tooth and the ring gear the same number of teeth?
So...how many teeth on the original 3.45 ring gear and pinion and how many teeth on the 4.10 ring gear and pinion? Last edited by Dynomite; 01-03-2010 at 07:04 PM. |
01-03-2010 | #35 | |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Quote:
3.45 38 Ring 11 Piinion 4.10 40 Ring 10 Pinion Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
01-03-2010 | #36 | |
Join Date: Apr 2004
Location: Germantown, MD
Posts: 738
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Quote:
This is the second ZR-1 I've had upgraded to 4:10 gears. I agree drivability is improved in most all measurable performance areas. One of my Z's was basically stock, the other has a 500Hp top end package. Hammering through 1st gear in the modified car still takes some getting used to. The stock Z with 4:10 gears was all upside including highway gas mileage (typically 25-26 MPG if I kept my foot out of it). With a stock car and 4:10 gears, I did not notice any significant difference in gas mileage. With the modified ZR-1, however, it does not matter how much I baby it, I haven't seen better than 20-21 MPG on a trip. |
|
01-03-2010 | #37 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
is your 500 hp pkg just inj housings and plenum, or is it heads too???? my callaway 475 snat zr1 with 392s gets about 24.5 27 on the freeway during a long run.if it has been a while since you have changed you 02 sensors or have a scanner,ck to see if one or both are a little lazy. .mine got lazy and mileage went in the sh$tter. changed them and poof milage back to normal .
|
01-03-2010 | #38 | |
Join Date: Apr 2004
Location: Germantown, MD
Posts: 738
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Quote:
Thanks for the tip! |
|
02-03-2010 | #39 |
Guest
Posts: n/a
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Thanks to Phil and others for all the advice to build my diff and get the 4:10 upgrade. Thanks for James LT1 for helping me out with his special tools and rebuilding the posi unit. I'm on my way now and will detail this housing before assembly to the batwing.
|
02-03-2010 | #40 |
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Finally changing to 4:10 gears......any other tips, tricks or recommedations?
Awesome buddy, you'll love em'
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|