![]() |
#11 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
![]()
Good info all...will get a new switch and replace. Would be great if that is the problem as opposed to a damaged wire somewhere between switch and CHMSL.
Really do appreciate the assistance. After switch install will let you know results... will be either ![]() ![]() |
![]() |
![]() |
![]() |
#12 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
![]()
Well, I have the switch of issue on order (will be to me on Monday)...but with that said my dealer indicated it is a 'discontinued' item and they found a dealer on the West coast that had one in stock which they purchased. Wow..parts are becoming more and more scarce (considering the brake light switch is NOT specific to the ZR-1 but C4 in general)
|
![]() |
![]() |
![]() |
#13 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#14 | |
![]() Join Date: Dec 2005
Location: Delanson, NY
Posts: 925
|
![]() Quote:
Ecklers and Corvette Central have the switch available too, $10-15.00 ![]() |
|
![]() |
![]() |
![]() |
#15 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
![]()
I obtained a NOS ACDelco brake light switch from a 'special supplier'... installed this morning along with changing out all the fuses in the main fuse box (passenger side dash end)... appears the switch was the culprit and all now is working... thanks all for you knowledgeable guidance on this issue
![]() |
![]() |
![]() |
![]() |
#16 |
![]() ![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
![]()
Glad you got it solved Michael
|
![]() |
![]() |
![]() |
#17 |
Join Date: Jan 2009
Location: Houston, Tx.
Posts: 56
|
![]()
I stand corrected, I just had a situation where only the brake lights above the window was not working.
|
![]() |
![]() |
![]() |
#18 |
![]() Join Date: Nov 2008
Location: New Orleans, LA
Posts: 8
|
![]()
Had same problem. Checked fuses - no problem. Changed all 4 bulbs in high mount light - still didn't work.
Decided it had to be the switch for the brake lights - seems it is a two part switch. Took cover off (the under the steering wheel) and replaced the switch. That did the trick. Have to be a bit of a contortionist to do the job, and it took some time to go through all the motions. It worked and I could get the inspection sticker. |
![]() |
![]() |
![]() |
|
|