|
06-23-2009
|
#1 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Replacement oil drain plug?
I need a new oil pan drain plug/washer -- anyone have one laying around?
|
|
|
|
06-23-2009
|
#2 | |
|
Guest
Posts: n/a
|
Re: Replacement oil drain plug?
Quote:
I've got some. |
|
|
|
|
06-23-2009
|
#3 |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Replacement oil drain plug?
I've been looking for a magnetic drain plug, G.M. &/or aftermarket with no luck...., .6250"-18 (five-eights) thread. Anybody have a source ? Not like making them is hard, but it does take a little time.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
06-23-2009
|
#4 |
  
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,461
|
Re: Replacement oil drain plug?
Last edited by tf95ZR1; 06-23-2009 at 11:33 PM. |
|
|
|
|
06-23-2009
|
#5 | |
|
Join Date: Oct 2004
Posts: 1,890
|
Re: Replacement oil drain plug?
Quote:
Last fall Joe Johnson (www.magdana.com) released the "Dimple" a magnetic plug and became a supporting vendor on the Corvette Forum. The early production information for the LT5 included in their initial release specified a "metric" application and I was quite "convinced" from earlier experiences that the application note was an "error". Joe contacted me after I had posted that the fit was certainly 5/8 - 18 vs the metric specification and they after confirmation from my "fit" and more research corrected their application to the 5/8 -18. They accomplished this in a couple/few days - a responsible move. Joe also sent me a "Dimple" to confirm the fit. I did the "fit" on a new LT5 pan along with a new GM LT5 plug that I've a few of. Both seem to be of equal fit. A few weeks ago Joe sent me a second "Dimple" which is a new release for them that does the LT5 with a "larger magnet"! I've mentioned the product to several for applications other than the LT5 also. I know of no-one that is unhappy with Joe's product. The early "Dimple" had a 6.25mm diameter magnet and the newer release is 12.5mm in diameter. The product is available from: Joe Johnson www.magdana.com "VetteMed" --- I do still have a few of the GM original "drain plugs"! I've answered your PM! Last edited by WVZR-1; 06-23-2009 at 09:26 PM. |
|
|
|
|
|
06-23-2009
|
#6 |
|
Join Date: Sep 2005
Location: Ontario, Canada
Posts: 204
|
Re: Replacement oil drain plug?
I purchased both their "Filter Magnet" and their "Dimple Plug"...Great product and excellent service!
|
|
|
|
|
06-24-2009
|
#7 |
|
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: Replacement oil drain plug?
Thanks Dave (WVZR-1). I'll check it out.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
 |
|
|
Linear Mode
