Closed Deck - Page 2 - ZR-1 Net Registry Forums

Polo-1 · 03-07-2009

this is a 368 4" bore. Steel sleeve.

stock 350 today.

Jagdpanzer · 03-07-2009

Great looking work!
What rod, piston and ring combo did you go with?

USAFPILOT · 03-10-2009

It looks like you made god use of the extra space around the cylinders...i know nothing about building an engine...but is the 441 using separate cylinder liners now or is it all one piece, I can tell it is a different color and that some of the original block was bored out. I guess it is also a stroker too, so will it turn similar peak RPM to a stock engine...more? Less? 415's seem to be somewhat common, but this is the only 441 I have heard of so far, maybe others are out there. I think I read about a 427 LT5 as well.

jonszr1 · 03-10-2009

i beleive that frank also has a 441 that mark haibeck built for him

Paul Workman · 03-10-2009

Quote:

Originally Posted by ALZR1

I did more port work,they are as big as Pete's now.Hopefully it will make
A lot power.
Yes stock gasket.

AL.

Love that billet crank, gleaming "down under". That is an awesome looking piece o' machinery you have there, Al. I can almost feel the ground shaking now! I'm really looking forward to seeing 'er run!

I swear...If they have that "all Corvette" run at US41 next fall, it would be fun to see the Zs pin some ears back. (Did a pretty good job of it last year but there was only 3 of us there!)

Is it spring yet???

P.

FU · 03-10-2009

That closed deck looks killer Al

Nice work !

Ccmano · 03-10-2009

Al,

I'm impressed! That is drop dead gorgous...

I find it interesting that like in the stock engine, siamising all the cylinders isn't causing heat related failures of the rings and cylinder walls. Of course there is no real higher mile track record of these up sized engines. Still, considering this type of work has been for a while now, it appears not to be a problem.
H

ALZR1 · 03-10-2009

Quote:

Originally Posted by Paul Workman

Love that billet crank, gleaming "down under". That is an awesome looking piece o' machinery you have there, Al. I can almost feel the ground shaking now! I'm really looking forward to seeing 'er run!

I swear...If they have that "all Corvette" run at US41 next fall, it would be fun to see the Zs pin some ears back. (Did a pretty good job of it last year but there was only 3 of us there!)

Is it spring yet???

P.

That Crank is made by Bryant just in case you want to order one.
any stroke.
Spring is right around the corner friend.We're going to have some fun this year with all boys.

AL.

A26B · 03-10-2009

Thunder at Stillwater II would be a great place to show them off!!

Come on Down!

03-10-2009

Quote:

Originally Posted by ALZR1

Spring is right around the corner friend.We're going to have some fun this year with all boys.

I'll tell Tony to bring the Enzo back to BG this year when I see him at Sebring.

03-07-2009	#11
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: Closed Deck this is a 368 4" bore. Steel sleeve. stock 350 today. Last edited by Polo-1; 03-10-2009 at 09:21 PM. Reason: pictures

03-07-2009	#12
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Closed Deck Great looking work! What rod, piston and ring combo did you go with?

03-10-2009	#13
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,348	Re: Closed Deck It looks like you made god use of the extra space around the cylinders...i know nothing about building an engine...but is the 441 using separate cylinder liners now or is it all one piece, I can tell it is a different color and that some of the original block was bored out. I guess it is also a stroker too, so will it turn similar peak RPM to a stock engine...more? Less? 415's seem to be somewhat common, but this is the only 441 I have heard of so far, maybe others are out there. I think I read about a 427 LT5 as well.

03-10-2009	#14
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: Closed Deck i beleive that frank also has a 441 that mark haibeck built for him

03-10-2009	#16
FU Join Date: Mar 2004 Location: Found Member Posts: 4,346	Re: Closed Deck That closed deck looks killer Al Nice work ! __________________ Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237

03-10-2009	#17
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Closed Deck Al, I'm impressed! That is drop dead gorgous... I find it interesting that like in the stock engine, siamising all the cylinders isn't causing heat related failures of the rings and cylinder walls. Of course there is no real higher mile track record of these up sized engines. Still, considering this type of work has been for a while now, it appears not to be a problem. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

03-10-2009	#19
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: Closed Deck Thunder at Stillwater II would be a great place to show them off!! Come on Down! __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.