Can I get a lift? - ZR-1 Net Registry Forums

LGAFF · 03-04-2009

Is there a lift out there that won't fall apart that I can get for about $1800(delivered)........thinking of buying one.....needs to be a 4 post.

key_on · 03-04-2009

There are some out there in the $2K range. Not sure if $1800 delivered is possible. Take a look a Pro Park and Master. Shop around. A lot of the lower priced lifts come from China. May or may not be a bad thing, but neet to be aware of what you're buying. I bought from All American. Very satisfied with quality and functionality.

-=Jeff=- · 03-04-2009

Lee do you have the height and room to get around it in the garage?

LGAFF · 03-05-2009

Yes it will be tight but will work. Need to get the cars stacked.

-=Jeff=- · 03-05-2009

Quote:

Originally Posted by LGAFF

Yes it will be tight but will work. Need to get the cars stacked.

Sell the red one

Toyvet1 · 03-05-2009

Lee i paid about $1900 for this lift last summer http://www.gregsmithequipment.com/Ma...p-xl-8k-ds.htm plus $175 to ship to Elgin. If you plan on bolting it to floor maybe you can get a deal with out the casters. Im in Bloomingdale if you want to come check it out and do some measuring.

rkreigh · 03-06-2009

the one I bought from northern tools was 1805 shipped to my door.

most places make you go and pick them up from a loading dock, and this would have happened too but they made a mistake and helped me out.

nice solid 9000 lb lift. came with casters, drip trays, and a tarp "diaper"

other than me FALLING off the d@mn thing, it's been a great lift and runs on 110 volts

needs a 30 amp feed though. very happy with it. the zr-1 lives on top of the TT z06 and turned my 2 car into a 3 car garage. the Ms. can keep her convert 325ci in the garage, and life is good.

put it together myself (which was a surprise) you'll for sure need a helper

the ramps are very heavy, especially the one with the hyd ram in it.

just do it! the other lifts are better quality, but this one is very heavy duty and works just fine. I would recommend putting some anchors into the foundation to stabilize it. not required (and I haven't done it either) but that little "wiggle" when you let the vette down on the stops can make you nervous! it's a sturdy lift, to be sure.

Nick · 03-06-2009

Spend the money and get a good, American made lift. Why take chances with your life (or your car)?

rkreigh · 03-13-2009

it's a good lift with zero problems and the 9k capacity is plenty strong.

all for buying american, but I looked at all of them is this is functionally and construction wise built like a tank. 1k was the only difference

been using it for a couple of years now, zero issues.

I put a LPE ZR-1 up on it with a turbo Z06 underneath, so yea, I'm pretty confident.

LGAFF · 10-30-2009

OK I am seriously thinking of doing this over the next few weeks. I have 9.5Ft ceilings and as the ZR-1 is 46.7" to the top so there is no issue with stacking the cars...will be backing in the top car.

Garage is 19ft wide, and about 20ft deep. Garage door is 16ft wide.

Any issues with the wife getting her car in on ther other side?????

Looking at a 4 post lift.

03-04-2009	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Can I get a lift? Is there a lift out there that won't fall apart that I can get for about $1800(delivered)........thinking of buying one.....needs to be a 4 post. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

03-04-2009	#2
key_on Join Date: Jul 2005 Location: Lees Summit, MO Posts: 102	Re: Can I get a lift? There are some out there in the $2K range. Not sure if $1800 delivered is possible. Take a look a Pro Park and Master. Shop around. A lot of the lower priced lifts come from China. May or may not be a bad thing, but neet to be aware of what you're buying. I bought from All American. Very satisfied with quality and functionality.

03-04-2009	#3
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Can I get a lift? Lee do you have the height and room to get around it in the garage? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

03-05-2009	#4
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Can I get a lift? Yes it will be tight but will work. Need to get the cars stacked. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

03-05-2009	#6
Toyvet1 Join Date: Dec 2007 Location: Bloomingdale, Il Posts: 330	Re: Can I get a lift? Lee i paid about $1900 for this lift last summer http://www.gregsmithequipment.com/Ma...p-xl-8k-ds.htm plus $175 to ship to Elgin. If you plan on bolting it to floor maybe you can get a deal with out the casters. Im in Bloomingdale if you want to come check it out and do some measuring.

03-06-2009	#7
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,087	Re: Can I get a lift? the one I bought from northern tools was 1805 shipped to my door. most places make you go and pick them up from a loading dock, and this would have happened too but they made a mistake and helped me out. nice solid 9000 lb lift. came with casters, drip trays, and a tarp "diaper" other than me FALLING off the d@mn thing, it's been a great lift and runs on 110 volts needs a 30 amp feed though. very happy with it. the zr-1 lives on top of the TT z06 and turned my 2 car into a 3 car garage. the Ms. can keep her convert 325ci in the garage, and life is good. put it together myself (which was a surprise) you'll for sure need a helper the ramps are very heavy, especially the one with the hyd ram in it. just do it! the other lifts are better quality, but this one is very heavy duty and works just fine. I would recommend putting some anchors into the foundation to stabilize it. not required (and I haven't done it either) but that little "wiggle" when you let the vette down on the stops can make you nervous! it's a sturdy lift, to be sure. __________________ 95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP)

03-06-2009	#8
Nick Join Date: Jul 2005 Location: Auburn, Washington Posts: 586	Re: Can I get a lift? Spend the money and get a good, American made lift. Why take chances with your life (or your car)? __________________ Nick ZR-1 Net Registry Founding Member #32 - lapsed...

03-13-2009	#9
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,087	Re: Can I get a lift? it's a good lift with zero problems and the 9k capacity is plenty strong. all for buying american, but I looked at all of them is this is functionally and construction wise built like a tank. 1k was the only difference been using it for a couple of years now, zero issues. I put a LPE ZR-1 up on it with a turbo Z06 underneath, so yea, I'm pretty confident. __________________ 95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP)

10-30-2009	#10
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Can I get a lift? OK I am seriously thinking of doing this over the next few weeks. I have 9.5Ft ceilings and as the ZR-1 is 46.7" to the top so there is no issue with stacking the cars...will be backing in the top car. Garage is 19ft wide, and about 20ft deep. Garage door is 16ft wide. Any issues with the wife getting her car in on ther other side????? Looking at a 4 post lift. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359