Help 91 Random Tech or Magnaflow cats Part number - Page 4 - ZR-1 Net Registry Forums

RICKYRJ1 · 02-24-2009

If Phil did it, trust me it is done right. I have seen his set up in person and it does look trick.

jonszr1 · 02-24-2009

you can also find these woven connectors in the summit cat.pg 68. i think they may help in the resonance issue . i did for the first time take a look at the resonator sec. of my corsa what i found is straight through piping that has another bigger pipe welded around it . there are no perferations in it . so what i am thinking is to weld a gutted case around around a x pipe to see if that might cure the resonance problem i have with the x pipe system on my black car. it seems thats what the corsa did to a degree.

GOLDCYLON · 03-06-2009

Quote:

Originally Posted by Sgreg

Sorry, George, GC picked them up.

Many thanks to Greg for these pieces, Hopefully I get to pickup the car tonight and also see how the polished A-mold project came out.

The MF cats came in on Monday so was glad to get those. The Install of the Jeals according to the ZFdoc went well but I will get all the details on it hopefully tonight. I finally get to use Carters center wheel caps on the A-molds.

Then back to emissions next week. I guess the stock prom goes back in then no full power key for the test right? Need to decide to send my other chip back to Rippe or go the MH route

jonszr1 · 03-06-2009

you might want to consider corey also for your prom needs .he has some neat tunes for our cars after porting .

PhillipsLT5 · 03-06-2009

send it to marc

GOLDCYLON · 03-07-2009

Quote:

Originally Posted by PhillipsLT5

send it to marc

Which one Phil the DRM chip or the Haibeck chip I have made an offer on? Daryll

PhillipsLT5 · 03-07-2009

Buy a chip from Marc or have Marc reburn your DRM chip if possible to satisfy Marc's suggestions

GOLDCYLON · 03-07-2009

Quote:

Originally Posted by tuband

No problem. I was hoping that if you had 4 and GC only needed 2, that might be a possibility. Seeing the pix on this thread gives me an idea of what I need to do and having a pair of transitions should make the install a lot easier. Thanks.

George

George sent you a PM, I have three left out of the 4 left. We only needed one.

GOLDCYLON · 03-07-2009

Project update, headers are installed. As advertised with the JEALS no dipstick tube removal or movement was required and they fit up like stock. Will take pics but I dont pick up the car until Sunday. The drivers side cat was indeed done. It was internally broken away as one large chunk of substrate inside and was rounded almost into a catalyst ball inside as it mushroomed inside the cat. When you shook the cat in your hand it sounded like a softball was moving around inside. Yikes

So the new stainless bullet MF cats are up as well and the ZFDoc did a good job on the transition piping as well. Polished A-Molds with Carter's center Caps are on with the new rear BFG's. Looking forward to driving her home soon.GC

-=Jeff=- · 08-10-2009

Sorry to drag up an old post, but do you have Pics GC?

02-24-2009	#31
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: Help 91 Random Tech or Magnaflow cats Part number If Phil did it, trust me it is done right. I have seen his set up in person and it does look trick.

02-24-2009	#32
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Help 91 Random Tech or Magnaflow cats Part number you can also find these woven connectors in the summit cat.pg 68. i think they may help in the resonance issue . i did for the first time take a look at the resonator sec. of my corsa what i found is straight through piping that has another bigger pipe welded around it . there are no perferations in it . so what i am thinking is to weld a gutted case around around a x pipe to see if that might cure the resonance problem i have with the x pipe system on my black car. it seems thats what the corsa did to a degree.

03-06-2009	#34
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Help 91 Random Tech or Magnaflow cats Part number you might want to consider corey also for your prom needs .he has some neat tunes for our cars after porting .

03-06-2009	#35
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,450	Re: Help 91 Random Tech or Magnaflow cats Part number send it to marc

03-07-2009	#37
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,450	Re: Help 91 Random Tech or Magnaflow cats Part number Buy a chip from Marc or have Marc reburn your DRM chip if possible to satisfy Marc's suggestions

03-07-2009	#39
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,147	Re: Help 91 Random Tech or Magnaflow cats Part number Project update, headers are installed. As advertised with the JEALS no dipstick tube removal or movement was required and they fit up like stock. Will take pics but I dont pick up the car until Sunday. The drivers side cat was indeed done. It was internally broken away as one large chunk of substrate inside and was rounded almost into a catalyst ball inside as it mushroomed inside the cat. When you shook the cat in your hand it sounded like a softball was moving around inside. Yikes So the new stainless bullet MF cats are up as well and the ZFDoc did a good job on the transition piping as well. Polished A-Molds with Carter's center Caps are on with the new rear BFG's. Looking forward to driving her home soon.GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

08-10-2009	#40
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,179	Re: Help 91 Random Tech or Magnaflow cats Part number Sorry to drag up an old post, but do you have Pics GC? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978