Harmonic balancer - ZR-1 Net Registry Forums

LGAFF · 10-19-2008

Pulled the balancer today, any thoughts on the condition? Looks alittle rough, and rubber seal is cracked? I see there are rebuild kits available?

Thoughts?

LGAFF
92 ZR1
#234

10-19-2008

No rebuild kits. Clean it up with some emery cloth of maybe a little fine grit sand paper and then paint it. Although get me a better picture of the cracking in the rubber isolator.

And damn your balancer has a lot of pins in it.

LGAFF · 10-19-2008

Tried to take a few more shots, but hard to take one thats not blurry, there are a total of 14 pins, three are raised in different partsa of the balancer. The rubber appears to be the same weight all the way around, however, it is cracked much like an old tire.

LGAFF
92 ZR1
#234

LGAFF · 10-19-2008

10-19-2008

Doesn't matter if the pins are raised. The hole depth is the same in each position in the balancer, and the pins are all the same length and weight.

Your camera have a macro function? And don't use the flash, use auxiliary lighting.

Email me the originals.

Polo-1 · 10-19-2008

with all those pins, you must a good mix of A & B piston/liners combo's.

Ccmano · 10-20-2008

When in doubt throw it out... works for food, anything rubber and a few other things I can think of. With all that cracking if it isn't separated today it will be.

If you think if how much time and money you will put into this engine don't skimp on a balancer. It will only come back to bite you later.

Hans

Chris_32212 · 10-20-2008

Quote:

Originally Posted by LGAFF

Tried to take a few more shots, but hard to take one thats not blurry, there are a total of 14 pins, three are raised in different partsa of the balancer. The rubber appears to be the same weight all the way around, however, it is cracked much like an old tire.

LGAFF
92 ZR1
#234

if you have zoom on your camera, step back and zoom in. its easier to get close ups that arent blurry that way. just trying to help. and i agree, if in doubt swap that shizz. lol. who wants to pull the motor back out to replace a balancer 5,000 miles down ther road? i know i wouldn't.

Chris

flyin ryan · 10-20-2008

it's not too bad, for a used factory dampr. do you know how much power your making?

LGAFF · 10-20-2008

I should be in the low 500hp range when the engine is done.

LGAFF
92 ZR1
#234

10-19-2008	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Harmonic balancer Pulled the balancer today, any thoughts on the condition? Looks alittle rough, and rubber seal is cracked? I see there are rebuild kits available? Thoughts? LGAFF 92 ZR1 #234

10-19-2008	#3
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Harmonic balancer Tried to take a few more shots, but hard to take one thats not blurry, there are a total of 14 pins, three are raised in different partsa of the balancer. The rubber appears to be the same weight all the way around, however, it is cracked much like an old tire. LGAFF 92 ZR1 #234

10-19-2008	#4
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Harmonic balancer

10-19-2008	#5
Jeffvette Guest Posts: n/a	Re: Harmonic balancer Doesn't matter if the pins are raised. The hole depth is the same in each position in the balancer, and the pins are all the same length and weight. Your camera have a macro function? And don't use the flash, use auxiliary lighting. Email me the originals.

10-19-2008	#6
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: Harmonic balancer with all those pins, you must a good mix of A & B piston/liners combo's.

10-19-2008	#2
Jeffvette Guest Posts: n/a	Re: Harmonic balancer No rebuild kits. Clean it up with some emery cloth of maybe a little fine grit sand paper and then paint it. Although get me a better picture of the cracking in the rubber isolator. And damn your balancer has a lot of pins in it.

10-20-2008	#7
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Harmonic balancer When in doubt throw it out... works for food, anything rubber and a few other things I can think of. With all that cracking if it isn't separated today it will be. If you think if how much time and money you will put into this engine don't skimp on a balancer. It will only come back to bite you later. Hans __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

10-20-2008	#9
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: Harmonic balancer it's not too bad, for a used factory dampr. do you know how much power your making? __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

10-20-2008	#10
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Harmonic balancer I should be in the low 500hp range when the engine is done. LGAFF 92 ZR1 #234