ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 09-15-2008   #1
Jerry#397
 
Jerry#397's Avatar
 
Join Date: Jul 2005
Location: Northern California
Posts: 73
Default Battery Tenders

Has anyone used the CTEK Battery Charger/Tender from Mid America? How does it comapre to the "Battery Tender" brand that is sold at the NCM and at MA? CTEK write up says "no need to disconnect the battery as it will not harm electronics". This is important to me as I fried the electronics on a large horse power outboard motor a few years back because I did not disconnect the battery.

Thanks
Jerry#397 is offline   Reply With Quote
Old 09-15-2008   #2
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
Default Re: Battery Tenders

i have not used them but some of my customers have. they absolutly LOVE them. i trust their word.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.
flyin ryan is offline   Reply With Quote
Old 09-15-2008   #3
ZZZZZR1
Banned
BANNED
 
Join Date: Oct 2006
Location: MD
Posts: 3,690
Default Re: Battery Tenders

Yes....

Love mine! No complaints @ all
ZZZZZR1 is offline   Reply With Quote
Old 09-15-2008   #4
Jerry#397
 
Jerry#397's Avatar
 
Join Date: Jul 2005
Location: Northern California
Posts: 73
Default Re: Battery Tenders

Thanks guys, ordered this morning.

Jerry
Jerry#397 is offline   Reply With Quote
Old 09-16-2008   #5
xlr8nflorida
 
xlr8nflorida's Avatar
 
Join Date: May 2008
Location: USA
Posts: 1,096
Default Re: Battery Tenders

I have a ctek 3300 on my ZR-1.

Love it
xlr8nflorida is offline   Reply With Quote
Old 09-17-2008   #6
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Battery Tenders

I have the battery tender and you dont need to disconnect the battery either. It has a quick connect charging lead wire port that you tuck out of the way and plug it in as you need. You would have been fine wither way. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 09-18-2008   #7
HADI-ZR1
Guest
 
Posts: n/a
Default Re: Battery Tenders

Quote:
Originally Posted by GOLDCYLON
I have the battery tender and you dont need to disconnect the battery either. It has a quick connect charging lead wire port that you tuck out of the way and plug it in as you need. You would have been fine wither way. GC
i have same product. one with 14 V , the other 12V.

Last edited by HADI-ZR1; 09-18-2008 at 04:50 PM.
  Reply With Quote
Old 09-18-2008   #8
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Battery Tenders

Mine is the 800mA Battery Tender. I have a heavy duty charger/de-sulfate unit when needed, but the BT is perfect to protect the battery plates from sulfate buildup and ready for a full power cranking when needed.

The unit senses charging levels and automatically folds back to a "green" trickle status. No need to disconnect the battery from the circuit, I find.

P.
Paul Workman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020