|
08-06-2008
|
#21 | |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Expecting.........
Quote:
What is your address GC??? 
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
08-06-2008
|
#22 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Expecting.........
Well, the bad news is its an assortment of Corvette Dymags;
3 17X9.5 Gen Is with no corvette stamp, etc...just like the ones on the Morrison corvette. 1 17X9.5 White Gen I with the corvette stamp on it 1 17X11 white Gen I with Corvette Stamp 4 Gen IIs, all 17X9.5 one with the orginal Dymag stickers still on them(3 white with Chevy emblem, and one black) 1 17X11 Dymag with a different offset and "Perkins" stamped on the front! All are in pretty good shape no big gouges, some are drilled for cooling caps, but I am going to guess I will make a few $ on these....Good news is without the matching 17X11s I will be selling all of these off, maybe will bring them down to funfest for the corvette challenge crowd! LGAFF 92 ZR1 #234 |
|
|
|
|
08-06-2008
|
#23 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Expecting.........
Quote:
|
|
|
|
|
|
08-06-2008
|
#24 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Expecting.........
17 X11, one and also one 17x9.5
http://i134.photobucket.com/albums/q...f/DSC02511.jpg Gen II Black: One with Dymag sticker http://i134.photobucket.com/albums/q...f/DSC02514.jpg http://i134.photobucket.com/albums/q...f/DSC02513.jpg Silver GEN I: Three of these http://i134.photobucket.com/albums/q...f/DSC02516.jpg Dymag 17X11; Never seen this one before it says Perkins on it, but it is without a doubt a Dymag. http://i134.photobucket.com/albums/q...f/DSC02517.jpg They are all in pretty good shape, the paint is heavily chipped, but no chips or chunks missing from magnesium, one has slight bend but rolls straight(white Gen I), and another has a crack in the barrel (black GEN II) but could be fixed(looks like something hard hit it) Edges are not rough, they have tape on them LGAFF 92 ZR1 #234 Last edited by LGAFF; 08-07-2008 at 12:16 AM. |
|
|
|
|
08-07-2008
|
#25 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: Expecting.........
The perkins one looks a little like the 16" Dymags on '87 Callaways. Dymag made wheels for more than just 'vettes, it's possible it's for some completely different application.
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
|
08-07-2008
|
#26 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Expecting.........
I weighed the GEN Is they are 17.8lbs for the fronts, and the one 17X11 I have for the rear is 20lbs.
Here is the odd part, I weighed the GEN IIs currently have on my Z, and they were the same a stock A-Molds. 21lbs on the front 22lbs on the back. I just weighed one of these GENIIs and they weigh 18.4 pounds, vs the 21 on my current set. ??????? LGAFF 92 ZR1 #234 |
|
|
|
|
08-07-2008
|
#27 |
|
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: Expecting.........
Less paint, no wheel weights, or an inaccurate scale? Or maybe quality control? Otherwise, you gonna swap yours for the lighter ones?
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
|
08-07-2008
|
#28 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Expecting.........
i am not sure what I am doing will probably sell the wheels, just need to figure our best way to sell them without getting stuck with a stray.
I do not imagine you can run a 315 on 17x9.5 wheel. If anyone knows of someone who needs a17X11 Gen I or wants to sell a GEN I of that size let me know LGAFF 92 ZR1 #234 |
|
|
|
 |
|
|
Linear Mode
