LT5 wont run with all cylinders - Page 3 - ZR-1 Net Registry Forums

Mika73 · 09-10-2005

There is broken intake cam on my engine..

Could someone help, please..

(Haibeck sells 4 cams set 4000USD)

wdo-mkr · 09-10-2005

Quote:

Originally Posted by Mika73

There is broken intake cam on my engine..

Could someone help, please..

(Haibeck sells 4 cams set 4000USD)

Lets hope they are at least aftermarkets with a larger lope. Good grief. It looks likek you have another cam coming from lotus(cliff) on the other forum. Keep in mind that you should replace the lifters as well under the cam that has broken. Here is a link for you to give you another option for cams. Hang in there.

http://www.lt5-parts.com/library/cat...5%2C%7CTop+End

If either of those deals fall through, I have a set of stock cams sitting on the shelf with only 30k miles on them as well.

Mika73 · 09-10-2005

Thanks

Yes. Cliff did send me cam. It leaves from UK to Finland at monday.

Lingenfelter also had cams.

Z Factor · 09-24-2005

So did you ever get an answer as to what the probable cause to this mess was? How are things coming along?

yellowz · 09-26-2005

hey mika
i no u said you swapped the coil positions but the gm # is the same for all 4 ib be willing to bet that you have a bad coil why not replace the one thats bad???
i would think if it were bad at 2,7 then you swapped it at another position it would do the same there???.2 years ag at carlise i had a canadien zr1 and his owner come done to fix a problem he had many issues bad tensioner,2ndary vac pump leak and it would run but you could feelit running on 6cylinders after gordon recheck the problem it was a bad coil,his was missing and not firing after we put the coil in took it for a blast up i81 the kid was all excited and thrilled.
I still think you have an electrical issue ,if you replace the coil while you are there although expensive replace the coil module.

Z Factor · 10-13-2005

Any updates?

Mika73 · 11-19-2005

Car is running now. Thanks to Haibeck of all help

Aurora40 · 11-19-2005

Quote:

Originally Posted by Mika73

Car is running now. Thanks to Haibeck of all help

Cool! So what was the problem?

cuisinartvette · 11-19-2005

fwiw, www.nelsonracingengine.com can get cams made to any lobe and hardness. I belive they are $2500/4. May want to contact him for specific info.

Mika73 · 11-21-2005

This..

http://forums.corvetteforum.com/phot...05_112-med.jpg

09-26-2005	#25
yellowz Join Date: Aug 2005 Posts: 54	wont run hey mika i no u said you swapped the coil positions but the gm # is the same for all 4 ib be willing to bet that you have a bad coil why not replace the one thats bad??? i would think if it were bad at 2,7 then you swapped it at another position it would do the same there???.2 years ag at carlise i had a canadien zr1 and his owner come done to fix a problem he had many issues bad tensioner,2ndary vac pump leak and it would run but you could feelit running on 6cylinders after gordon recheck the problem it was a bad coil,his was missing and not firing after we put the coil in took it for a blast up i81 the kid was all excited and thrilled. I still think you have an electrical issue ,if you replace the coil while you are there although expensive replace the coil module.

10-13-2005	#26
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,667	Re: LT5 wont run with all cylinders Any updates?

11-19-2005	#27
Mika73 Join Date: May 2004 Location: Finland Posts: 123	Re: LT5 wont run with all cylinders Car is running now. Thanks to Haibeck of all help

11-19-2005	#29
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: LT5 wont run with all cylinders fwiw, www.nelsonracingengine.com can get cams made to any lobe and hardness. I belive they are $2500/4. May want to contact him for specific info. __________________ 1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj.

11-21-2005	#30
Mika73 Join Date: May 2004 Location: Finland Posts: 123	Re: LT5 wont run with all cylinders This.. http://forums.corvetteforum.com/phot...05_112-med.jpg

09-10-2005	#21
Mika73 Join Date: May 2004 Location: Finland Posts: 123	There is broken intake cam on my engine.. Could someone help, please.. (Haibeck sells 4 cams set 4000USD)

09-10-2005	#23
Mika73 Join Date: May 2004 Location: Finland Posts: 123	Thanks Yes. Cliff did send me cam. It leaves from UK to Finland at monday. Lingenfelter also had cams.

09-24-2005	#24
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,667	So did you ever get an answer as to what the probable cause to this mess was? How are things coming along?