|
02-25-2008
|
#1 |
Join Date: Oct 2007
Location: New Zealand
Posts: 2
|
door rattle
I own a 92 ZR1. The passenger door has a bad clunk to it when you close it. It only happens when the window is part way down. I can't find anything loose and the felt anti rattle guides look good,any ideas?
|
|
|
|
02-25-2008
|
#2 |
|
Guest
Posts: n/a
|
Re: door rattle
They all do it, I just try to be a little more gentle if the window isn't all the way down or all the way up.
|
|
|
|
02-25-2008
|
#3 | |
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: door rattle
Quote:
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
|
|
|
|
02-25-2008
|
#4 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,655
|
Re: door rattle
Well...
Looks like I won't have to take apart my passenger door. Mine rattles too when the window isn't all the way up and you close the door. ... .. . Drat. I was hoping to cure that. What causes it and why doesn't the drivers door do it as bad? Tom
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
|
02-25-2008
|
#5 |
 Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: door rattle
You might take a look at your door lock linkage, the factory retainers/guides or pretty weak - if a linkage rod slips out of the guide it can rattle.
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
|
|
|
 |
|
|
Linear Mode
