ECM Reboot - ZR-1 Net Registry Forums

Jetjock · 11-20-2021

I had my ECM overhauled, for lack of a better term, for my 92 Z. Got it installed and nothing. I didn't hear the pumps come or anything. First time that I have done this so is the whole ECM erased and requires re-installing.

Never done that before so I don't know. Now what? Shipit to Marc Haibeck?

Roy

secondchance · 11-20-2021

Who did the overhaul? What was done and why? if I may ask.

tccrab · 11-21-2021

Try reseating the PROM inside the ECM.
Without the PROM nothing will turn on.

Crabs

Jetjock · 11-21-2021

Now that's a thought. Ok. I did the diagnosis on a code 31 a while back. I did the usual stuff like replace the sensor, etc. No fix. Finally managed to get some help and traced it down to the ECM. I knew Ken Anderson and sent it to him for a look see and see if he could track down the problem. I talked to him and found out that he sent it to another place to do that. I don't know the name of the company. I got a call from a little old lady about returning it. I gave her my address and found out Ken had died. When I had time I put it in and started it. Engine turns over great but no start. It normally starts right away. I got to thinking that the thing was wiped clean which is not what I wanted and told Ken that at the time. I have to call her tomorrow and find out more information about what was done to it. That's it.

Roy

Jetjock · 11-21-2021

Well. I checked out the ecm and it is totally wiped. Won't test at all. This is not what I asked for. Only thing that I can think of is Ken had planned to install the software when he got it back and died before he could. He wife probably had no idea of that and shipped it not knowing.

Roy

P.S., I checked and the company is totally out of business.

G8nightman · 11-21-2021

Ecm?s aren?t cheap I have a few if you need one. Hope you can fix it.

Sent from my iPhone using ZR-1 Net Registry

tccrab · 11-22-2021

Time to give Marc Haibec a call.
If anybody can steer you in the right direction, it's him.

Crabs

Ccmano · 11-23-2021

Quote:

Originally Posted by tccrab

Time to give Marc Haibec a call.
If anybody can steer you in the right direction, it's him.

Crabs

Haibeck offers an ECM repair service. Call him.
H

jss06c6 · 11-23-2021

Sorry to hear this! Hopefully only a MEMCAL issue.

Sent from my SM-G950U using ZR-1 Net Registry mobile app

wfot · 11-23-2021

is there a chip/memcal in the computer?
just checking the obvious first....
John

11-20-2021	#1
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	ECM Reboot I had my ECM overhauled, for lack of a better term, for my 92 Z. Got it installed and nothing. I didn't hear the pumps come or anything. First time that I have done this so is the whole ECM erased and requires re-installing. Never done that before so I don't know. Now what? Shipit to Marc Haibeck? Roy __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

11-20-2021	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: ECM Reboot Who did the overhaul? What was done and why? if I may ask.

11-21-2021	#3
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,655	Re: ECM Reboot Try reseating the PROM inside the ECM. Without the PROM nothing will turn on. Crabs __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]

11-21-2021	#4
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	Re: ECM Reboot Now that's a thought. Ok. I did the diagnosis on a code 31 a while back. I did the usual stuff like replace the sensor, etc. No fix. Finally managed to get some help and traced it down to the ECM. I knew Ken Anderson and sent it to him for a look see and see if he could track down the problem. I talked to him and found out that he sent it to another place to do that. I don't know the name of the company. I got a call from a little old lady about returning it. I gave her my address and found out Ken had died. When I had time I put it in and started it. Engine turns over great but no start. It normally starts right away. I got to thinking that the thing was wiped clean which is not what I wanted and told Ken that at the time. I have to call her tomorrow and find out more information about what was done to it. That's it. Roy __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

11-21-2021	#5
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	Re: ECM Reboot Well. I checked out the ecm and it is totally wiped. Won't test at all. This is not what I asked for. Only thing that I can think of is Ken had planned to install the software when he got it back and died before he could. He wife probably had no idea of that and shipped it not knowing. Roy P.S., I checked and the company is totally out of business. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary Last edited by Jetjock; 11-21-2021 at 04:07 PM.

11-21-2021	#6
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: ECM Reboot Ecm?s aren?t cheap I have a few if you need one. Hope you can fix it. Sent from my iPhone using ZR-1 Net Registry __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

11-22-2021	#7
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,655	Re: ECM Reboot Time to give Marc Haibec a call. If anybody can steer you in the right direction, it's him. Crabs __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]

11-23-2021	#9
jss06c6 Join Date: Aug 2015 Location: Magnolia, Texas Posts: 884	Re: ECM Reboot Sorry to hear this! Hopefully only a MEMCAL issue. Sent from my SM-G950U using ZR-1 Net Registry mobile app

11-23-2021	#10
wfot Join Date: Jan 2009 Location: New jersey Posts: 156	Re: ECM Reboot is there a chip/memcal in the computer? just checking the obvious first.... John