427" short block available - ZR-1 Net Registry Forums

tpepmeie · 03-28-2021

I have taken on a new LT5 project and need to move this engine to a new home. I would prefer to sell as a complete assembled shortblock, but will consider separating.

2-bolt block, Closed deck ductile iron liners, 4.130" finished bore size
Bryant 4.000" stroke billet crankshaft.
Carrillo H-beam tapered rods
Ross Pistons & pins, Total seal rings

The shortblock was refreshed in 2016, and has only run-in hours on it since then. Never installed after refresh. This engine made over 700 bhp with good heads and cams.

Selling entire shortblock for $8500
or the Bryant 4" crankshaft for $4200
Reasonable offers considered. Please PM me if interested.

Todd

pepmeierengines@yahoo.com
(317) 503-3287
PepmeierEngineDevelopment

tpepmeie · 04-03-2021

There's been a few folks wanting pics and more info about this engine. You can see the entire freshening build from 2016 on my blog. Lots of pics and discussion of the build.
http://pepmeierenginedevelopment.blogspot.com/2016/

CamP · 04-03-2021

14.8:1 compression ratio?

tpepmeie · 04-03-2021

more like 14.5 when we finished the cc'ing of the heads.
I run E85 in it.

CamP · 04-03-2021

Quote:

Originally Posted by tpepmeie

more like 14.5 when we finished the cc'ing of the heads.
I run E85 in it.

E85 is a lot cheaper than C12!

Thomas ZR-1 · 04-15-2021

Email sent...

tpepmeie · 05-11-2021

Sold. Thanks

Sent from my iPhone using ZR-1 Net Registry

03-28-2021	#1
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 815	427" short block available I have taken on a new LT5 project and need to move this engine to a new home. I would prefer to sell as a complete assembled shortblock, but will consider separating. 2-bolt block, Closed deck ductile iron liners, 4.130" finished bore size Bryant 4.000" stroke billet crankshaft. Carrillo H-beam tapered rods Ross Pistons & pins, Total seal rings The shortblock was refreshed in 2016, and has only run-in hours on it since then. Never installed after refresh. This engine made over 700 bhp with good heads and cams. Selling entire shortblock for $8500 or the Bryant 4" crankshaft for $4200 Reasonable offers considered. Please PM me if interested. Todd pepmeierengines@yahoo.com (317) 503-3287 PepmeierEngineDevelopment __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

04-03-2021	#2
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 815	Re: 427" short block available There's been a few folks wanting pics and more info about this engine. You can see the entire freshening build from 2016 on my blog. Lots of pics and discussion of the build. http://pepmeierenginedevelopment.blogspot.com/2016/ __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

04-03-2021	#3
CamP Join Date: Jun 2012 Location: fort worth Posts: 183	Re: 427" short block available 14.8:1 compression ratio?

04-03-2021	#4
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 815	Re: 427" short block available more like 14.5 when we finished the cc'ing of the heads. I run E85 in it. __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

04-15-2021	#6
Thomas ZR-1 Join Date: Oct 2012 Location: Germany Posts: 230	Re: 427" short block available Email sent... __________________ Best thing in life is a ZR-1 ride

05-11-2021	#7
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 815	Re: 427" short block available Sold. Thanks Sent from my iPhone using ZR-1 Net Registry __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development