Anyone here have one of these / heard of these? - ZR-1 Net Registry Forums

rush91 · 01-28-2021

https://deadbranddesigns.com/

Came across this surfing this morning. I like the idea and is priced fairly cheap......Deciding if I want one and where I would put it. And I'm not talking a huge plaque like the Pontiac G8 on the websites main page. A smaller one that could fit in the engine bay somewhere.

GOLDCYLON · 01-28-2021

id stick with Lees MerCruiser plate it seems to be at home on top of the Map Sensor bracket

rush91 · 01-28-2021

Quote:

Originally Posted by GOLDCYLON

id stick with Lees MerCruiser plate it seems to be at home on top of the Map Sensor bracket

Ya, I think your right. People always point out Lees MerCruiser plate.

dredgeguy · 01-29-2021

I purchased this hood insert at Carlisle 2 years ago from a member who sold his ZR-1 and was clearing out his leftover "goodies". This slides in between the hood light wire supports. First time I ever saw anything like this and have not seen one since.

HAWAIIZR-1 · 01-29-2021

Quote:

Originally Posted by rush91

https://deadbranddesigns.com/

Came across this surfing this morning. I like the idea and is priced fairly cheap......Deciding if I want one and where I would put it. And I'm not talking a huge plaque like the Pontiac G8 on the websites main page. A smaller one that could fit in the engine bay somewhere.

Thanks for sharing. It?s pretty cool idea for the car shows. I might consider something like this for the ECM, not sure and will redo my motor/engine bay when I can get back to my car.

Sent from my iPhone using ZR-1 Net Registry

HAWAIIZR-1 · 01-29-2021

Quote:

Originally Posted by dredgeguy

I purchased this hood insert at Carlisle 2 years ago from a member who sold his ZR-1 and was clearing out his leftover "goodies". This slides in between the hood light wire supports. First time I ever saw anything like this and have not seen one since.

Hey Charlie! You have something nice and unique there and never seen that. Years ago I had something similar made from a vendor on ZR-1 Registry merchandise but no longer listed. Yours looks like vinyl?, whereas mine is carpeting like a floor mat. It came with two more pieces with the year and prod # in the other two blanks. I had it made for my now sold 90 so I put just the other pieces on only for show as with all the other Carter200 bling on my 95. I?ll be cutting out those two other spaces to install the Greenwood hood vents.

Image1611955708.249724.jpg

Sent from my iPhone using ZR-1 Net Registry

dredgeguy · 01-29-2021

Yours looks great Craig and you are correct, mine is vinyl but with the look of leather. The ZR-1 is raised embossed and Corvette is embroidered with red threads.

HAWAIIZR-1 · 01-29-2021

Quote:

Originally Posted by dredgeguy

Yours looks great Craig and you are correct, mine is vinyl but with the look of leather. The ZR-1 is raised embossed and Corvette is embroidered with red threads.

Thanks and I like the one you found too. The design is cool with the red trimming. The only thing I don?t like about mine is when it is off there are huge Velcro strips on the hood. [emoji1303]🤙🏼

Sent from my iPhone using ZR-1 Net Registry

01-28-2021	#1
rush91 Join Date: Feb 2016 Location: Carterville Illinois Posts: 852	Anyone here have one of these / heard of these? https://deadbranddesigns.com/ Came across this surfing this morning. I like the idea and is priced fairly cheap......Deciding if I want one and where I would put it. And I'm not talking a huge plaque like the Pontiac G8 on the websites main page. A smaller one that could fit in the engine bay somewhere. Last edited by rush91; 01-28-2021 at 01:48 PM.

01-28-2021	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Anyone here have one of these / heard of these? id stick with Lees MerCruiser plate it seems to be at home on top of the Map Sensor bracket __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-29-2021	#7
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,714	Re: Anyone here have one of these / heard of these? Yours looks great Craig and you are correct, mine is vinyl but with the look of leather. The ZR-1 is raised embossed and Corvette is embroidered with red threads. __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa