How do I clean the fuel level sensor in my ZR-1 - Page 2 - ZR-1 Net Registry Forums

TX '90 ZR1 · 01-05-2021

Here's a pic of my sending unit after rebuilding. New pumps, stainless clamps, submersible fuel hose (very important), and Carter's "Y" that he designed because the original plastic one I had split and was causing a pressure bleed down. This "Y" is the prototype. Carter has made a couple of small changes since this one to make it fit a bit better.
You will need 2 sizes of hose. 1/4 and 5/16 if I recall correctly. The submersible hose is expensive, but it is what needs to be used.
z062718-08.jpg

z062718-06.jpg

01-05-2021	#11
TX '90 ZR1 Join Date: Oct 2017 Location: TX Posts: 2,038	Re: How do I clean the fuel level sensor in my ZR-1 Here's a pic of my sending unit after rebuilding. New pumps, stainless clamps, submersible fuel hose (very important), and Carter's "Y" that he designed because the original plastic one I had split and was causing a pressure bleed down. This "Y" is the prototype. Carter has made a couple of small changes since this one to make it fit a bit better. You will need 2 sizes of hose. 1/4 and 5/16 if I recall correctly. The submersible hose is expensive, but it is what needs to be used. z062718-08.jpg z062718-06.jpg __________________ Kenny 1990 #442