10-28-2019 | #31 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,727
|
Re: Rebuilding The LT5 Tensioner
If you run a search for 1991 corvette belt tensioner a few new tensioners do pop up. Non Dayco though...
|
10-29-2019 | #32 | |
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
Re: Rebuilding The LT5 Tensioner
Quote:
If I buy one and try it I'll come back here and post results. |
|
03-16-2020 | #33 |
Join Date: Dec 2015
Location: Colorado
Posts: 69
|
Re: Rebuilding The LT5 Tensioner
I found on RockAuto AC Delco 10055897 for the L98. Same internals, correct pulley and also had the aluminum cover which was good for me because my original cover chipped when using a puller to remove it.
Didn’t suspect anything wrong with my original at 41k miles, but since I had the radiator and fans out, figured it was worth it. Took mine apart to find that the wear plate under the cover was completely gone, only the little tabs left. Also the spring was a little weak, I could operate the tensioner by hand. Swapped over new parts following this thread. Good as new!
__________________
1991 ZR-1 #1900 Black/Black |
03-16-2020 | #34 | |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,120
|
Re: Rebuilding The LT5 Tensioner
Quote:
Don’t suppose you have a how to or pics? Good tip either way! Sent from my iPhone using ZR-1 Net Registry
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
03-16-2020 | #35 | |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Rebuilding The LT5 Tensioner
Quote:
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
03-16-2020 | #36 |
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,120
|
Re: Rebuilding The LT5 Tensioner
Duh! Thanks, I don't know how I missed that. Great info....thanks again!
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
05-25-2021 | #37 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Rebuilding The LT5 Tensioner
Dave.... your Facebook link is down. Where can we find the more complete instructions you posted there?
Thanks H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
08-06-2022 | #38 |
Join Date: Jun 2017
Location: Italy
Posts: 8
|
Re: Rebuilding The LT5 Tensioner
|
08-09-2022 | #39 |
Join Date: Jul 2017
Location: West Chester, PA
Posts: 380
|
Re: Rebuilding The LT5 Tensioner
Great post, going to have to do this soon, super helpful!
__________________
1990 Black/Black ZR-1 #1155 1993 White/Red coupe (Regrettably sold) |
08-10-2022 | #40 |
Join Date: Nov 2016
Location: New Brunswick
Posts: 963
|
Re: Rebuilding The LT5 Tensioner
Looks like Dave hasn't been on in a few months. I hope all is ok with him. Anyone know him in the outside world?
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|