ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Member Rides

Reply
 
Thread Tools Display Modes
Old 01-10-2008   #31
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

i don't have that many good shots from the outside that give a good prespective & it's dark out & cold right now so instead i'll put up some shots as it was going up & maybe you'll get a better feel for it that way. this is from my backyard before the excavation started.this is around the middle of May. [IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #32
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

excavation starting. the walk in door is my first addition five years ago. the big living room window up top on the left used to go straight down & was right on top of the old garage door. they called this a drive under garage.[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #33
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

excavation getting serious.[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #34
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

now it's at rough grade. if you notice my driveway on the left it's like 8"-8.5" thick. my neighbors on the right is standard 4". crazy! & i had to saw cut all of it. PIA. it's now approx. early June.[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #35
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

buddy of mine drilling pile holes. he built that machine himself. it's like a bob-cat on steroids.[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #36
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

i finished laying the rebar. another PIA. gradebeam is up.the chimney on the left was a problem to go around the whole time. it wasn't coming down.[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #37
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

floor & driveway poured. this was a big day at the time. the window on the left is where my walkway between the two sides are now[IMG][/IMG]

Last edited by flyin ryan; 06-26-2008 at 08:16 PM.
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #38
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

materials starting to show up. i didn't know it then but as it turned out i was shorted one truss out of that pile. you can guess how that went over trusses are 38' long. [IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #39
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

starting to look like something. put those tree's in for some separation. it's getting toward the middle to end of Sept. [IMG][/IMG]
flyin ryan is offline   Reply With Quote
Old 01-10-2008   #40
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,736
Default Re: WARNING:don't veiw if you don't like RED

getting there[IMG][/IMG]
flyin ryan is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025