Aluminum flywheel.... new clutch?

[Karl]

I had the Fadanza 13lb flywheel in my '92Z I use to own with the same clutch. in my current set up I am using the same clutch again, just a different flywheel.

Centerforce # 381039

[zr1assassin]

Originally Posted by Karl

I had the Fadanza 13lb flywheel in my '92Z I use to own with the same clutch. in my current set up I am using the same clutch again, just a different flywheel.

Centerforce # 381039

How did that combo do?

[Karl]

Originally Posted by zr1assassin

How did that combo do?

It worked quite well. Never had any issues with slippage. Was a little on the noisy side.

I prefer this combo better, seems to not be as loud.

I use Amsoil synchromesh manual transmission fluid in both transmissions.

I do not know how much hp this set up is good for but it is working well in the '93 which i am guessing is 475 - 500hp at the flywheel.

[zr1assassin]

Originally Posted by Karl

It worked quite well. Never had any issues with slippage. Was a little on the noisy side.

I prefer this combo better, seems to not be as loud.

I use Amsoil synchromesh manual transmission fluid in both transmissions.

I do not know how much hp this set up is good for but it is working well in the '93 which i am guessing is 475 - 500hp at the flywheel.

Awesome! Flywheel✏centerforce clutch✏amsoil✏....what else do I need here?

[Karl]

I believe a set of special length bolts for the flywheel. While you are in there may want to replace the pilot bushing too.

[zr1assassin]

Originally Posted by Karl

I believe a set of special length bolts for the flywheel. While you are in there may want to replace the pilot bushing too.

I've seen something about the bolts, I think jerry sells them. Pilot bushing and I think that may be it....
That Centerforce # 381039 was a DF right?

[Karl]

They are ARP bolts. If you search the part number will pop up or ask Paul I think he knows it.

Yes everything is a direct fit, no problems at all.

[zr1assassin]

Originally Posted by Karl

They are ARP bolts. If you search the part number will pop up or ask Paul I think he knows it.

Yes everything is a direct fit, no problems at all.

I was looking and seen a 381039 and a DF381039

[Karl]

Originally Posted by zr1assassin

I was looking and seen a 381039 and a DF381039

I did not use the Dual Friction clutch, just the standard 381039.

[zr1assassin]

Hmmmmmm