Console cup holder - Page 2 - ZR-1 Net Registry Forums

BigJohn · 08-03-2018

Quote:

Originally Posted by Mystic ZR-1

Not in CT, closer to 2 ☹️

Is that at BJ's?

MickeyD · 08-04-2018

Quote:

Originally Posted by Mystic ZR-1

The 90s had no cup holder insert.
Not sure about other years.

Are you sure. My black 90 that has been NCRS judged by previous owner with 750 miles has one. I had a new regular 90 in 1990 and I seem to remember it having one. Who knows, I could be wrong.

Mystic ZR-1 · 08-04-2018

???
Who knows?
No points were deducted when
mine was regional Top Flighted.
Cup holder? What ever happened to holding your
beer can between your legs, the way Nature intended?
🍺

geezer · 08-04-2018

I have a'90, I bought new in April 1990, no insert!

JMO343 · 08-04-2018

Thanks for the information. My is correct the the way it is.

John

BigJohn · 08-04-2018

Quote:

Originally Posted by Mystic ZR-1

???
Who knows?
No points were deducted when
mine was regional Top Flighted.
Cup holder? What ever happened to holding your
beer can between your legs, the way Nature intended?
🍺

Did your 89 have them?
Mine did!

I probably have 6 still the bags: Callaway kept losing them!

I just don’t remember where I put them.

Reichert · 08-04-2018

My 1990 didn't have with an insert either when I bought it - just the ash tray. But honestly, it seems wrong, as it is easy for stuff to fall through the hole when the tray is open and the console bezel screw is showing. So I bought a couple of the liners from corvette central. They are really flimsy but get the job done.

I was also missing those little triangle inserts for the seat position switches, which made me think the cup holder liner was also lost to time and neglect.

GOLDCYLON · 08-04-2018

They ALL had them. They were easy to get lost. If you ever drank a 12 oz can of soda or your favorite adult beverage they tended to stick to the can. If you forgot and threw the can away there goes the can condom in the trash. As big John stated any maintenance Work especially removing the shift console plate they tend to get lost. They hide the screw and are great for coins. They should have been in every C4 at delivery the entire ZR-1 model year run

geezer · 08-04-2018

With respect Sir...… based on my 1 owner 1990 they Did Not have a cup insert. My '90 was never out of my sight from the moment it rolled off the Carrier Truck at the dealer. Just a little anal about the ZR1 arrival ;;ya think!!

Mystic ZR-1 · 08-04-2018

The screw is in the forward “hole” where the ashtray insert should go,
placing it closer to the cigarette lighter.
New cars have neither.

08-04-2018	#13
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,635	Re: Console cup holder ??? Who knows? No points were deducted when mine was regional Top Flighted. Cup holder? What ever happened to holding your beer can between your legs, the way Nature intended? 🍺

08-04-2018	#14
geezer Join Date: Aug 2010 Location: ottawa canada Posts: 156	Re: Console cup holder I have a'90, I bought new in April 1990, no insert!

08-04-2018	#15
JMO343 Join Date: Jul 2018 Location: Patchogue, NY Posts: 135	Re: Console cup holder Thanks for the information. My is correct the the way it is. John

08-04-2018	#17
Reichert Join Date: Feb 2018 Location: Austin, TX Posts: 104	Re: Console cup holder My 1990 didn't have with an insert either when I bought it - just the ash tray. But honestly, it seems wrong, as it is easy for stuff to fall through the hole when the tray is open and the console bezel screw is showing. So I bought a couple of the liners from corvette central. They are really flimsy but get the job done. I was also missing those little triangle inserts for the seat position switches, which made me think the cup holder liner was also lost to time and neglect. __________________ -Stephen 1990 #2288

08-04-2018	#18
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Console cup holder They ALL had them. They were easy to get lost. If you ever drank a 12 oz can of soda or your favorite adult beverage they tended to stick to the can. If you forgot and threw the can away there goes the can condom in the trash. As big John stated any maintenance Work especially removing the shift console plate they tend to get lost. They hide the screw and are great for coins. They should have been in every C4 at delivery the entire ZR-1 model year run __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

08-04-2018	#19
geezer Join Date: Aug 2010 Location: ottawa canada Posts: 156	Re: Console cup holder With respect Sir...… based on my 1 owner 1990 they Did Not have a cup insert. My '90 was never out of my sight from the moment it rolled off the Carrier Truck at the dealer. Just a little anal about the ZR1 arrival ;;ya think!!

08-04-2018	#20
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,635	Re: Console cup holder The screw is in the forward “hole” where the ashtray insert should go, placing it closer to the cigarette lighter. New cars have neither.