FINALLY!!!...An affordable set of coil overs that bolt right in!!! - Page 2 - ZR-1 Net Registry Forums

1LEZ · 06-28-2018

No go if you lose FX3

DRM500RUBYZR-1 · 06-29-2018

Thanks, but no thanks.
I will stick with the DRM coil-overs which retain the FX3.
Whenever I hit a road where the suspension seems to have difficulty coping, I simply turn the switch a time or two, and problem solved.
Why give that up?
Now that this one has been set, I no longer need to fiddle with ride height.
The new gear looks nice, but solves a problem that I do not have, and creates one that I do not currently have.
Serious track folk likely will feel differently, as well as those who want to drop their height, and raise it, and drop it.................
I am sure some will love it, so your efforts are appreciated!

Marty

WARP TEN · 06-29-2018

Do these utilize the magnetorheological shock absorber technology developed by GM? If not, does anyone know if the early or current crop of Corvette MSRC shocks can be adapted to the C4s? If so has anyone done so? The suspension on my Z06 is nothing short of amazing in terms of compliance over bumps and the breadth of performance options. --Bob

EvanZR1 · 06-29-2018

Quote:

Originally Posted by WARP TEN

Do these utilize the magnetorheological shock absorber technology developed by GM? If not, does anyone know if the early or current crop of Corvette MSRC shocks can be adapted to the C4s? If so has anyone done so? The suspension on my Z06 is nothing short of amazing in terms of compliance over bumps and the breadth of performance options. --Bob

No, they aren't MSRC, and nobody has adapted MSRC for an aftermarket kit for any car. OEM only as there are a lot of electronics and computers involved.

oricale · 06-29-2018

Here are the initial install...these coil overs needed NO modification to the car.[emoji41][emoji41][emoji4]

As for uses, this is again focused on those who want to have a track suspension and control while lowering thier car. We arent trying to recreate the wheel or replace it...just make it easier and cheaper if you want it.20180629_134749.jpg 20180629_120215.jpg 20180629_124130.jpeg 20180629_114421.jpg

Sent from my SM-G955U using ZR-1 Net Registry mobile app

Mystic ZR-1 · 06-29-2018

No reinforcement of the front upper shock mounts?
They weren't designed to take the loads they'll see with
the coilover mod?
Pretty sure Callaway reinforced them on their conversions?
Big John?

oricale · 06-29-2018

Quote:

Originally Posted by Mystic ZR-1

No reinforcement of the front upper shock mounts?
They weren't designed to take the loads they'll see with
the coilover mod?
Pretty sure Callaway reinforced them on their conversions?
Big John?

These are initial installation pics. To confirm fit and finish. Bracing the mounts is pretty straight forward.

Sent from my SM-G955U using ZR-1 Net Registry mobile app

BigJohn · 06-29-2018

Quote:

Originally Posted by Mystic ZR-1

No reinforcement of the front upper shock mounts?
They weren't designed to take the loads they'll see with
the coilover mod?
Pretty sure Callaway reinforced them on their conversions?
Big John?

Yep 👍🏿
I have FX3 also

oricale · 06-29-2018

Quote:

Originally Posted by BigJohn

Yep [emoji1531]
I have FX3 also

AGAIN,....not for those who wish to keep FX3...a system that many people have that arent working. So in light of the difficulty in getting parts for the FX3 system(a few have came into the shop that the owner didnt even know they werent connected, werent working ect)

Also this setup would be good for those with Base C4 corvettes-that may not have the FX3 system.[emoji41] [emoji6] .

No need to disparage an idea or a design because you dont need it.

"DC current is the only safe current, AC will kill a man just as lightning would"
(Thomas Edison)Attachment 7755 20180629_161259.jpg

Sent from my SM-G955U using ZR-1 Net Registry mobile app

RussMcB · 06-29-2018

Quote:

Originally Posted by oricale

No need to disparage an idea or a design because you dont need it

I was thinking the same thing as I was reading through some of the posts.

I think it's a great project. Hats off to you for taking it on.

06-28-2018	#11
1LEZ Join Date: Nov 2016 Location: Tx Posts: 101	Re: FINALLY!!!...An affordable set of coil overs that bolt right in!!! No go if you lose FX3

06-29-2018	#12
DRM500RUBYZR-1 Join Date: Sep 2008 Location: Mullica Hill, New Jersey Posts: 2,593	Re: FINALLY!!!...An affordable set of coil overs that bolt right in!!! Thanks, but no thanks. I will stick with the DRM coil-overs which retain the FX3. Whenever I hit a road where the suspension seems to have difficulty coping, I simply turn the switch a time or two, and problem solved. Why give that up? Now that this one has been set, I no longer need to fiddle with ride height. The new gear looks nice, but solves a problem that I do not have, and creates one that I do not currently have. Serious track folk likely will feel differently, as well as those who want to drop their height, and raise it, and drop it................. I am sure some will love it, so your efforts are appreciated! Marty

06-29-2018	#13
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,095	Re: FINALLY!!!...An affordable set of coil overs that bolt right in!!! Do these utilize the magnetorheological shock absorber technology developed by GM? If not, does anyone know if the early or current crop of Corvette MSRC shocks can be adapted to the C4s? If so has anyone done so? The suspension on my Z06 is nothing short of amazing in terms of compliance over bumps and the breadth of performance options. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

06-29-2018	#15
oricale Join Date: Oct 2011 Location: STAFFORD VA, Posts: 576	Re: FINALLY!!!...An affordable set of coil overs that bolt right in!!! Here are the initial install...these coil overs needed NO modification to the car.[emoji41][emoji41][emoji4] As for uses, this is again focused on those who want to have a track suspension and control while lowering thier car. We arent trying to recreate the wheel or replace it...just make it easier and cheaper if you want it.20180629_134749.jpg 20180629_120215.jpg 20180629_124130.jpeg 20180629_114421.jpg Sent from my SM-G955U using ZR-1 Net Registry mobile app __________________ [B][I][COLOR=red]1990 ZR1[/COLOR][COLOR=black] [U]#00077 [COLOR=red]RED[/COLOR]/[COLOR=red]RED[/COLOR] (10Y022 PEP CAR) [/U][/COLOR][/I][/B][B][I][COLOR=red]1991 ZR1[/COLOR][COLOR=black] [U]#00517 ("Irene")[COLOR=red]WHITE[/COLOR]/[COLOR=red]RED-SOLD:cry:[/COLOR] [B][/B] [/U][/COLOR][/I][/B][B][I][COLOR=red]1992 ZR1[/COLOR][COLOR=black] [U]#00445("The Revenant")[COLOR=red][COLOR="Black"]BLACK [/COLOR][/COLOR]/[COLOR=red]RED(2016 T.O.D!) [/COLOR] [/U][/COLOR][/I][/B] [B][I][COLOR=red]2009 [COLOR=red]Z06!![COLOR=black]BLK/BLK rare Linen interior[/COLOR] 707HP!![/COLOR] [/COLOR][/I][/B] [B][I][COLOR=red]2006[/COLOR] BLK/BLK Z51 (Just SICK FAST!)SOLD)[/I][/B] [B][I]1996 BLK/BLK LT4 Grnsprt(sold...Twice!)[/I][/B] [B][I]1991 RED/REDL98(Fell off the shipping truck:([/I][/B] [B][I]1980 BLK/RED L82(Sold)[/I][/B] [B][I][B][I]1990[/I][/B] RED/BLK(sold.....In Japan)[/I][/B] [I][COLOR=black][B][I]2006[/I][/B][/COLOR][/I] [COLOR=red]Mustang GT[/COLOR] ([B][I]mach 1[/I][/B])[B](sold)[/B] [COLOR=black][B][I]1969[/I][/B][/COLOR] [COLOR=red]Mach[/COLOR] [B][I]1(sold in Japan)[/I][/B] [COLOR=black][B][I]1969[/I][/B][/COLOR] [COLOR=red]Mach[/COLOR] [B][I]1#2(sold)[/I][/B] [B][I]WAZOO Member...[/I][/B] [url]www.evolution-motorsport.com[/url] facebook/evolutionmotorsportengineering Your Local [url]www.Amsoil.com[/url] dealer/user.. Victory Loves Preparation

06-29-2018	#16
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,633	Re: FINALLY!!!...An affordable set of coil overs that bolt right in!!! No reinforcement of the front upper shock mounts? They weren't designed to take the loads they'll see with the coilover mod? Pretty sure Callaway reinforced them on their conversions? Big John?