ZR-1 floor mats - ZR-1 Net Registry Forums

Norwegianmopar · 06-18-2018

Looking for ZR-1 logo floor mats for our 91. Any good tips on where to buy some?

Sent from my SM-G955F using ZR-1 Net Registry mobile app

lfalzarano · 06-18-2018

Try Eckler’s
https://www.ecklerscorvette.com/1992...1991-1994.html

Also Check EBay and Amazon for Lloyds

Lou

lfalzarano · 06-18-2018

The link is just a sample to the location at Eckler’s

Lou

Flyman 27 · 06-19-2018

This is where I got mine.

https://www.ebay.com/itm/LLOYD-Class...wAAOSwnbZYE3D4

Norwegianmopar · 06-19-2018

Found them here too: https://www.corvettecentral.com/acce...o-lloyd-134145

S.hafsmo · 06-19-2018

I've read there can be issues with the thickness of some of these pads, making it hard to press the clutch pedal fully, engaging the clutch safety switch. Just something to be aware of.

lfalzarano · 06-19-2018

Just checked mine and the mat is 2” below the carpeting height. The curve of the brake pedal makes contact with the firewall well above the interior rug height and obviously the mat.

Lou

S.hafsmo · 06-19-2018

Never had the issue myself.
http://zr1.net/forum/showthread.php?t=28800

WARP TEN · 06-20-2018

Just an FYI, I was a bit disappointed with the Lloyds mats I got for the tan interior of my '95. I wanted to save the originals and get a matching set of mats to use on a daily basis. The color did not match the rest of the carpet--which the promo said it would--and the material was quite different from the carpet and the original mats. But they still worked fine for daily use keeping the original carpet clean and unworn. Hopefully the quality has improved in the past couple of years. For the new car I got a set of GM Z06 mats which match the originals and were not too expensive. --Bob

06-18-2018	#1
Norwegianmopar Join Date: Mar 2018 Location: Norway Posts: 345	ZR-1 floor mats Looking for ZR-1 logo floor mats for our 91. Any good tips on where to buy some? Sent from my SM-G955F using ZR-1 Net Registry mobile app __________________ Roy Martin 1994 ZR-1 #112 Admiral Blue/Black Dana 4:10 Aluminum flywheel Corsa exhaust Watson headers Haibeck chip 470 HP/399 RWHP 1991 ZR-1 #400 White/Red (SOLD) Dana 4:10 Powder coated engine Haibeck performance chip Borla exhaust

06-18-2018	#2
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: ZR-1 floor mats Try Eckler’s https://www.ecklerscorvette.com/1992...1991-1994.html Also Check EBay and Amazon for Lloyds Lou __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

06-18-2018	#3
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: ZR-1 floor mats The link is just a sample to the location at Eckler’s Lou __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

06-19-2018	#4
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Re: ZR-1 floor mats This is where I got mine. https://www.ebay.com/itm/LLOYD-Class...wAAOSwnbZYE3D4 __________________ 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete

06-19-2018	#5
Norwegianmopar Join Date: Mar 2018 Location: Norway Posts: 345	Re: ZR-1 floor mats Found them here too: https://www.corvettecentral.com/acce...o-lloyd-134145

06-19-2018	#6
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: ZR-1 floor mats I've read there can be issues with the thickness of some of these pads, making it hard to press the clutch pedal fully, engaging the clutch safety switch. Just something to be aware of. __________________ - '90 ZR-1

06-19-2018	#7
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: ZR-1 floor mats Just checked mine and the mat is 2” below the carpeting height. The curve of the brake pedal makes contact with the firewall well above the interior rug height and obviously the mat. Lou __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

06-19-2018	#8
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: ZR-1 floor mats Never had the issue myself. http://zr1.net/forum/showthread.php?t=28800 __________________ - '90 ZR-1

06-20-2018	#9
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,095	Re: ZR-1 floor mats Just an FYI, I was a bit disappointed with the Lloyds mats I got for the tan interior of my '95. I wanted to save the originals and get a matching set of mats to use on a daily basis. The color did not match the rest of the carpet--which the promo said it would--and the material was quite different from the carpet and the original mats. But they still worked fine for daily use keeping the original carpet clean and unworn. Hopefully the quality has improved in the past couple of years. For the new car I got a set of GM Z06 mats which match the originals and were not too expensive. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"