04-05-2018 | #11 |
Join Date: Oct 2004
Posts: 1,890
|
Re: HELP - LT5 Idle Air control connector
This is a release tool that will reach a "Pull To Seat" terminal tab. The actual GM/Delphi tool was just a 'vise device' with a twist to tighten like a Dremel etc. You need to enter the rear of the shell.
Delphi vice is a 12180559-1 Understanding the length and the very small awl type point I'm sure the creative mind can sort it. Release shouldn't be an issue. https://www.amazon.com/Rennsteig-Sup.../dp/B00A8GL7NA If this link works it would be the GM/Delphi device. https://www.ebay.co.uk/itm/GM-Delphi...75.c100623.m-1 Last edited by WVZR-1; 04-05-2018 at 10:25 AM. |
04-05-2018 | #12 |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 915
|
Re: HELP - LT5 Idle Air control connector
I found a vendor for the connector and terminals.
https://www.bmotorsports.com/shop/index.php They look to have all the connectors we would need. Thanks to all for the help. John
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) |
04-05-2018 | #13 |
Join Date: Aug 2005
Location: Fishers, IN
Posts: 815
|
Re: HELP - LT5 Idle Air control connector
__________________
Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development |
04-11-2018 | #14 |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 915
|
Re: HELP - LT5 Idle Air control connector
Got the replacement connector and terminals from Ballenger Motor Sports. Made the new connection, looks like OEM.
Thanks to all for the advice and help. John
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) |
04-11-2018 | #15 | |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: HELP - LT5 Idle Air control connector
Quote:
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
04-12-2018 | #16 |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 915
|
Re: HELP - LT5 Idle Air control connector
Hans,
I bought a new connector and terminals from Ballenger Motorsports and installed the connector, new crimps. Did not want to splice in pigtails. Wanted it to appear OEM. John
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) |
04-12-2018 | #17 | |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: HELP - LT5 Idle Air control connector
Quote:
Thanks H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
04-12-2018 | #18 | |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: HELP - LT5 Idle Air control connector
Quote:
There’s enough wire to do that? I need to replace mine also.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
04-12-2018 | #19 |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 915
|
Re: HELP - LT5 Idle Air control connector
Ballenger Motorsports. Link in my previous message above.
CONN-75638 GM Delphi / Packard - 4 way metripack 150.2 sealed male connector Kit for iac, black The terminals are PULL 2 SEAT, in other words you release them from the wire side with a double prong tool. Push them out the front. Jim Voter's post shows a picture of the tool. I removed the short section of conduit to give some room for the repair. Pulled the rear rubber back to access the rear of the plug, then released the 4 wires one at a time. I opened up the rear crimp on each metal terminal and cut the old terminal off. I only lost about 1/8 inch of each wire. Moved the wires to the new connector and crimped new terminals on then seated them into the plastic connector. Just remember you crimp the terminals on AFTER the wire goes thru the connector. Put the conduit back on. Pretty simple job actually, sorry I waited so long to fix it. John
__________________
1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold) Last edited by jrd1990zr1; 04-16-2018 at 11:35 AM. |
04-14-2018 | #20 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: HELP - LT5 Idle Air control connector
Just as an "FYI", another supplier I've used and had good experiences with (connectors and such) is Del City.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|