|
09-06-2017
|
#1 |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,843
|
Does this look like an AC Delco Throwout Bearing to you?
Got this one yesterday. Came in an AC Delco box and wrapped in AC Delco paper. The metal is a bit beefier than the other aftermarket bearing I have sitting here. Looking at the the bearing itself it's not the green center and makings I expected.
H    
Last edited by Ccmano; 09-06-2017 at 02:27 PM. |
|
|
|
09-06-2017
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,401
|
Re: Does this look like an AC Delco Throwout Bearing to you?
Looks the same except not green as you said. Does it have INA o4 & 19* markings on the rubber seal?
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
09-06-2017
|
#3 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,843
|
Re: Does this look like an AC Delco Throwout Bearing to you?
Quote:
H |
|
|
|
|
|
09-06-2017
|
#4 |
|
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,401
|
Re: Does this look like an AC Delco Throwout Bearing to you?
looks & sounds legit to me
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
09-06-2017
|
#5 |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,843
|
Re: Does this look like an AC Delco Throwout Bearing to you?
Thanks Jerry.
This was an interesting deal. I bought two from this source, all they had. When I got them yesterday I opened them to inspect. Strangely on one of the bearings one of the retaining clip hooks was broken off. So I sent a photo and complained to the seller. Next thing I know they refunded all of my money, aplogised and told me to keep them for free! Now that's over the top customer service. Anybody know if this other one is salvageable? H 
|
|
|
|
|
09-06-2017
|
#6 |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,730
|
Re: Does this look like an AC Delco Throwout Bearing to you?
So far, US made TO bearings I have seen typically had one green dot. Does not mean without green dot is not US made or made to meet GM standard. May I ask where this TO bearing was bought?
|
|
|
|
|
09-06-2017
|
#7 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,843
|
Re: Does this look like an AC Delco Throwout Bearing to you?
Quote:
H |
|
|
|
|
|
09-06-2017
|
#8 | |
|
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,401
|
Re: Does this look like an AC Delco Throwout Bearing to you?
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
 |
|
|
Linear Mode
