FS 1990 ZR-1 Convertible Body w/title - Page 2 - ZR-1 Net Registry Forums

-=Jeff=- · 09-05-2017

Sorry, Curiosity is getting to me.. Are all the body parts in primer or multicolor?

I don't know much about the C4 vert top frames, will this particular car accept the Glass rear window?

shawn8492 · 09-10-2017

Quote:

Originally Posted by Blue Flame Restorations

Empty body, converted into convertible "correctly" as this is the only way I do things. Doors original to the car. Hood.

Modified NEW convertible deck lid that attaches just like a factory GM convertible. Installed one piece convertible rear upper surround panel with absolutely no seams to ever bleed through. This is done right.

Even the ZR-1 Spyder had a pieced together rear upper surround panel with seams. I would say that this is the only correct ZR-1 convertible upper surround panel there is. When the mock-up was done, the rear 1/4 panels were left attached to the body. The convertible center section was seamed in and then the mold was made. The deck lid was modified to fit the 1/4's.

There are no bumpers or rocker panels included.

Has clear title.

When you sat "empty body" does this mean no dash or wiring also?
Thanks,
Shawn

shawn8492 · 09-10-2017

Quote:

Originally Posted by -=Jeff=-

Sorry, Curiosity is getting to me.. Are all the body parts in primer or multicolor?

I don't know much about the C4 vert top frames, will this particular car accept the Glass rear window?

If it is not a glass window frame, it can be converted to one.
Shawn

shawn8492 · 09-10-2017

Brett,
Are you going to make the rear clip and decklid to sell?
Shawn

Blue Flame Restorations · 09-16-2017

Car was originally red. Original ZR-1 car converted to convertible.

Has NO interior pieces. No dash, etc. EMPTY SHELL

Convert top will as an original C4 corvette does. hardtop would also fit.

No bumpers or rockers.

YES, I will sell the convertible panels for $2k. You would have to source your own convertible hardware from Ebay.

There have been a few converted. From what I've seen, not always done where everything lines up right. This is done perfectly. No seams. Bonds in factory bonding areas.

This would be a pretty straight forward conversion if someone had a running car and wanted it converted.

I've done the R&D and crafted the molds. Someone else can do the easy part.

-=Jeff=- · 09-17-2017

I would LOVE to have a wide body Convertible.. Challenge I have is space which could probably be worked around, but the time is the killer,

Also moving a carcass around with no wheels could provide to be a challenge as well.. the positive to this would be getting it all painted prior to swapping things then you could paint it what ever color you wanted

the negative is there is NO Space for anything in a C4 vert behind the seats

RHanselman · 09-22-2017

I'm game... Left a PM and voice message...

Cheers,
Ron

Pete · 09-26-2017

Hi Ron
If you need a couplete ZR-1 to finish your convertible.
I have a complete running 1990 ZR-1 i will sell for $10K
shipped within the 48.

Also PM'd you.
Pete

RHanselman · 09-26-2017

Going to convert my Ruby. Thanks for thinking of me!

Sent from my iPhone using ZR-1 Net Registry

-=Jeff=- · 09-26-2017

Quote:

Originally Posted by RHanselman

Going to convert my Ruby. Thanks for thinking of me!

Sent from my iPhone using ZR-1 Net Registry

So a Snake Skinner bodied ZR-1 Convertible?

09-05-2017	#11
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: FS 1990 ZR-1 Convertible Body w/title Sorry, Curiosity is getting to me.. Are all the body parts in primer or multicolor? I don't know much about the C4 vert top frames, will this particular car accept the Glass rear window? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

09-10-2017	#14
shawn8492 Join Date: Jun 2017 Location: AR Posts: 73	Re: FS 1990 ZR-1 Convertible Body w/title Brett, Are you going to make the rear clip and decklid to sell? Shawn

09-16-2017	#15
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: FS 1990 ZR-1 Convertible Body w/title Car was originally red. Original ZR-1 car converted to convertible. Has NO interior pieces. No dash, etc. EMPTY SHELL Convert top will as an original C4 corvette does. hardtop would also fit. No bumpers or rockers. YES, I will sell the convertible panels for $2k. You would have to source your own convertible hardware from Ebay. There have been a few converted. From what I've seen, not always done where everything lines up right. This is done perfectly. No seams. Bonds in factory bonding areas. This would be a pretty straight forward conversion if someone had a running car and wanted it converted. I've done the R&D and crafted the molds. Someone else can do the easy part. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

09-17-2017	#16
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: FS 1990 ZR-1 Convertible Body w/title I would LOVE to have a wide body Convertible.. Challenge I have is space which could probably be worked around, but the time is the killer, Also moving a carcass around with no wheels could provide to be a challenge as well.. the positive to this would be getting it all painted prior to swapping things then you could paint it what ever color you wanted the negative is there is NO Space for anything in a C4 vert behind the seats __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

09-22-2017	#17
RHanselman Join Date: Jul 2005 Location: Cresson, TX Posts: 970	Re: FS 1990 ZR-1 Convertible Body w/title I'm game... Left a PM and voice message... Cheers, Ron __________________ Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int

09-26-2017	#18
Pete Join Date: Dec 2003 Location: Chicagoland,IL Posts: 2,679	Re: FS 1990 ZR-1 Convertible Body w/title Hi Ron If you need a couplete ZR-1 to finish your convertible. I have a complete running 1990 ZR-1 i will sell for $10K shipped within the 48. Also PM'd you. Pete __________________ '91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage