ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 11-20-2007   #1
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default couple a quick ?'s

First, why does my LTPWS light come on everytime I drive for a little while? I dont have any air loss in any tire.

Second, does anyone know a part number for the reverse light switch on the ZF.........I assume it would be the same as a regular C4 with the ZF, but I want to double check that.
TIA
32valvZ is offline   Reply With Quote
Old 11-20-2007   #2
Jeffvette
Guest
 
Posts: n/a
Default Re: couple a quick ?'s

LTPWS is garbage. My suggestion is to pull them out as they are a hazard when driving at speed. But more than likely the power generator is going out on it.


Back up light is #10159402
  Reply With Quote
Old 11-20-2007   #3
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: couple a quick ?'s

Quote:
Originally Posted by Jeffvette
LTPWS is garbage. My suggestion is to pull them out as they are a hazard when driving at speed. But more than likely the power generator is going out on it.


Back up light is #10159402
just to reiterate...this is the switch on the tranny...not a light correct?
32valvZ is offline   Reply With Quote
Old 11-20-2007   #4
Jeffvette
Guest
 
Posts: n/a
Default Re: couple a quick ?'s

Correct, it's a pain to get out.
  Reply With Quote
Old 11-20-2007   #5
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: couple a quick ?'s

Quote:
Originally Posted by Jeffvette
Correct, it's a pain to get out.
Ok, thanks Jeff...yea, it will be a tight area to fit a wrench in, but I think I can get to it......I can always "manipulate" one of my old non Snap-On wrenches to fit up there or an old socket. It almost looks like if I were to take a drift and tap it with a hammer, I could break off the plastic enough to easily get a socket to fit in there with a small breaker bar.....

Should I expect my local GM dealer to have this?
32valvZ is offline   Reply With Quote
Old 11-20-2007   #6
Jeffvette
Guest
 
Posts: n/a
Default Re: couple a quick ?'s

I would not expect them to. The Reno warehouse shows 2 in stock and the LA warehouse shows 6 available.
  Reply With Quote
Old 11-20-2007   #7
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: couple a quick ?'s

Quote:
Originally Posted by Jeffvette
I would not expect them to. The Reno warehouse shows 2 in stock and the LA warehouse shows 6 available.
Yea, I basically meant they can order it for me if I ask for that specific pt#...sorry for being unclear. thanks again....
32valvZ is offline   Reply With Quote
Old 11-22-2007   #8
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: couple a quick ?'s

FYI, I ordered the switch from Bill B, and he sent along a tool he'd fabbed up. Worked like a charm, and I shipped him the tool back along with a check.
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Old 11-22-2007   #9
Jason 91
 
Jason 91's Avatar
 
Join Date: Mar 2006
Location: Denver, CO
Posts: 124
Default Re: couple a quick ?'s

I need to do the same thing to mine. What is the special tool?

Thanks,

Jason
__________________
1991 Quasar Blue ZR-1
Jason 91 is offline   Reply With Quote
Old 11-23-2007   #10
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: couple a quick ?'s

It was just a box wrench only he like welded on another box wrench head IIRC, so it was deeper.
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020