03-28-2017 | #21 |
Join Date: Feb 2017
Location: Southbury CT
Posts: 101
|
Re: Oil Cooler Line replacement
Awesome! Did it make a giant mess when you disconnected the lines? I am planning on stuffing rags all over the place to avoid oil all over the place.
__________________
:Eagle:[URL=http://s653.photobucket.com/user/craigwhite84/media/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg.html][IMG]http://i653.photobucket.com/albums/uu256/craigwhite84/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg[/IMG][/URL] 1990 ZR1 Black/Black #2317 |
03-28-2017 | #22 |
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,253
|
Re: Oil Cooler Line replacement
You ever get the new radiator installed?
|
03-28-2017 | #23 |
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
|
Re: Oil Cooler Line replacement
No big deal and not too much of a mess. Like you suggested, pack some rags under the connections. Getting the fittings on the motor can be tough, I used a large adjustable wrench because I had nothing that big. Once they're broken loose, you should be able to un-screw them by hand.
Big John: no, not yet, but soon... Last edited by Mystic ZR-1; 03-28-2017 at 04:15 PM. Reason: . |
03-28-2017 | #24 |
Join Date: Nov 2016
Location: Southlake, TX
Posts: 592
|
Re: Oil Cooler Line replacement
I made the mistake of going with "OEM" equivalents which leaked from the hose after 500 miles.
I went with Jerry's and have been happy. Jerry's also have the benefit of being flexible so you can do a bit of routing and bending around other hoses for proper clearance. I had less oil spill than you think, but lots of rags are the order. Remember the Teflon tape.
__________________
Bill Schroeder Texas Proud! 1991 Corvette ZR1 #1388 2015 Challenger Scat Pack Shaker |
03-29-2017 | #25 |
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 838
|
Re: Oil Cooler Line replacement
Get Jerry's lines. Also don't go all he-man on it like I did or you will just break the seal from being too tight. Ask me how I know.
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration |
03-31-2017 | #26 |
Join Date: Feb 2017
Location: Southbury CT
Posts: 101
|
Re: Oil Cooler Line replacement
I rolled the dice on the Lines from ZIP and installed them last night. I used a 1 1/2" open ended wrench and tapped on the wrench with a lead hammer and they loosened right up. I used a little silicone to hold the rubber o rings in place like a glue. I didn't over tighten any of the fasteners.
__________________
:Eagle:[URL=http://s653.photobucket.com/user/craigwhite84/media/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg.html][IMG]http://i653.photobucket.com/albums/uu256/craigwhite84/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg[/IMG][/URL] 1990 ZR1 Black/Black #2317 |
04-15-2017 | #27 |
Join Date: Feb 2017
Location: Southbury CT
Posts: 101
|
Re: Oil Cooler Line replacement
Well, My roll of the dice didn't pay off. Don't buy the Oil Cooler lines from this place!!!!!!!!!!!!!!!!. One hose completely blew apart and made a huge mess. I will be having a discussion with ZIP on Monday. Pics to follow.
__________________
:Eagle:[URL=http://s653.photobucket.com/user/craigwhite84/media/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg.html][IMG]http://i653.photobucket.com/albums/uu256/craigwhite84/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg[/IMG][/URL] 1990 ZR1 Black/Black #2317 |
04-15-2017 | #28 |
Join Date: Nov 2016
Location: Southlake, TX
Posts: 592
|
Re: Oil Cooler Line replacement
Sorry! That sucks! Get your money back from Zip and call Jerry. You could have your new lines dellivered and installed by Wednesday.
__________________
Bill Schroeder Texas Proud! 1991 Corvette ZR1 #1388 2015 Challenger Scat Pack Shaker |
04-15-2017 | #29 |
Join Date: Feb 2017
Location: Southbury CT
Posts: 101
|
Re: Oil Cooler Line replacement
Asphalt driveway ruined-entire car covered in oil, garage oil filled, hopefully the engine is ok. total BS I will be letting everyone know the deal with this crap material
__________________
:Eagle:[URL=http://s653.photobucket.com/user/craigwhite84/media/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg.html][IMG]http://i653.photobucket.com/albums/uu256/craigwhite84/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg[/IMG][/URL] 1990 ZR1 Black/Black #2317 |
04-16-2017 | #30 |
Join Date: Feb 2017
Location: Southbury CT
Posts: 101
|
Re: Oil Cooler Line replacement
__________________
:Eagle:[URL=http://s653.photobucket.com/user/craigwhite84/media/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg.html][IMG]http://i653.photobucket.com/albums/uu256/craigwhite84/Kelly%20Boat/IMG_0468a_zpso50qvl1y.jpg[/IMG][/URL] 1990 ZR1 Black/Black #2317 |
|
|