ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-22-2016   #11
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Flat Plane Crank LT5

Quote:
Originally Posted by tpepmeie View Post
Dom,
Imagine the crank throws all on the same "plane", rather than at 90 degrees to each other. Usually it is "up, down, down, up" for the 4 rod journals. Still have a cylinder event every 90 degrees, but they alternate banks (Left, Right, Left, Right, ...). And all the firing intervals are evenly spaced on each bank. Helps exhaust tuning quite a bit, and all cylinders exhibit the same airflow performance. On a 90 degree V-8, certain cylinders can perform up to 8-10% worse than the best cylinder due to exhaust tuning (mainly the closely spaced (90 degrees apart in the firing sequence) cylinders on each side.).

The downside... a considerable secondary shake, in the side-to-side axis. Not as naturally well balanced as a 90-degree crank. And-you can't run a large stroke due to this vibration.
Todd,

Thanks. I thought the name denoted basically a 180 journal config.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 05-22-2016   #12
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: Flat Plane Crank LT5

Because of this configuration they are absolutely insane when under boost.
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 05-23-2016   #13
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Flat Plane Crank LT5

Quote:
Originally Posted by Fully Vetted View Post
Because of this configuration they are absolutely insane when under boost.
David,

Would u explain further why that is?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 05-23-2016   #14
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: Flat Plane Crank LT5

I believe it is because of two things. It's ability to rev so quickly due to less rotating mass and it's ability to evacuate its exhaust so efficiently. These things are nothing but giant air pumps. If you shove air in, especially under boost, you've got to get air out at the same rate or it robs power.

I did misspeak earlier. The 5.2 is not the Coyote engine. The Coyote engine is an 11:1 compression 5.0L yielding 435HP/390 lb ft of torque. The 5.2L FPC is the Voodoo engine that comes with 12:1 compression and yields 526HP at, wait for it...7500 RPM! With a redline of 8250! IMHO, this is the modern day LT5. A bean counters be damned engine that changes the rules and flips the bird to those that want to play on a level playing field. And the only car this engine is available in is a Shelby.

Here's a great article on the Voodoo engine:

http://www.powerperformancenews.com/...e/#prettyPhoto
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover

Last edited by Fully Vetted; 05-23-2016 at 04:49 PM.
Fully Vetted is offline   Reply With Quote
Old 05-23-2016   #15
mgbrv8
 
Join Date: Jul 2009
Location: Texas
Posts: 793
Default Re: Flat Plane Crank LT5

Here is some sound with some revs

https://www.facebook.com/holger.hove...2992382110799/

David Hetrick
mgbrv8 is offline   Reply With Quote
Old 05-23-2016   #16
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: Flat Plane Crank LT5

Wow.
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 05-23-2016   #17
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Flat Plane Crank LT5

Should we start a "Show us your Crank" thread....oh, uh...maybe not
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 05-23-2016   #18
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Flat Plane Crank LT5

Sure, here's my 4" Bryant

__________________
Phil Wasinger
1994 Torch Red ZR-1
WAZOO Member
George Braml Intake
Jagdpanzer is offline   Reply With Quote
Old 05-23-2016   #19
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Flat Plane Crank LT5

Not often you can brag about having a 4 inch crank
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 05-23-2016   #20
mgbrv8
 
Join Date: Jul 2009
Location: Texas
Posts: 793
Default Re: Flat Plane Crank LT5

Now that's funny.

Dave


Quote:
Originally Posted by LGAFF View Post
Not often you can brag about having a 4 inch crank
mgbrv8 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:06 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020